Dian Landman
Member
Hey guys. Quick question for someone who might have had the same problem before. Bought a new JD 6195M with greenstar. Dome is 6000 series and 4240 screen. I usually run my Kuhn axis 40.2 on an agleader incommand 1200 gps.
Hooked up the spreader this afternoon of about 3 weeks of no use to the new tractor and gps. It picks up the spreader and does all commands but the working width keeps varying from the set width. So the spreader is set to 20m but the working width doesnt want to change from 23.5m. Even if I change the width on the spreader settings it changes the set width but then the gps changes the working width aswell. So if I change the working width to 23.5m then the gps changes the working width to 25.5m for mapping. I can still set the track width to 20m if the spreader is on 20m but it then stays on the 23.5m working width so it says it has a 3.5m overlap.
Any help with this problem? The JD technicians are stumped and says last resort is software update. Still trying to get in touch with the Kuhn people.
Going to start spreading tomorrow so hopefully it fixes itself overnight or when I get to the first field it runs fine.
Hooked up the spreader this afternoon of about 3 weeks of no use to the new tractor and gps. It picks up the spreader and does all commands but the working width keeps varying from the set width. So the spreader is set to 20m but the working width doesnt want to change from 23.5m. Even if I change the width on the spreader settings it changes the set width but then the gps changes the working width aswell. So if I change the working width to 23.5m then the gps changes the working width to 25.5m for mapping. I can still set the track width to 20m if the spreader is on 20m but it then stays on the 23.5m working width so it says it has a 3.5m overlap.
Any help with this problem? The JD technicians are stumped and says last resort is software update. Still trying to get in touch with the Kuhn people.
Going to start spreading tomorrow so hopefully it fixes itself overnight or when I get to the first field it runs fine.