Hilly
Member
- Location
- Scottish Borders.
How much are they I want one for fastrac ?
Hydraulic toplink.
- Thread starter Greythundercloudys
- Start date
I bought two hydraulic top links, one a CAT 3 closed end for plough and Trio, the other a hook end for Cat2/3.
I agonised about the cost but have not regretted it all. So much easier and means small adjustments get made whilst working rather than choosing to ignore fine tuning because it’s too difficult with heavy machines.
All much safer as no climbing in between machine to make manual adjustments. I really cannot think of a good reason why I didn’t do it earlier.
I agonised about the cost but have not regretted it all. So much easier and means small adjustments get made whilst working rather than choosing to ignore fine tuning because it’s too difficult with heavy machines.
All much safer as no climbing in between machine to make manual adjustments. I really cannot think of a good reason why I didn’t do it earlier.
john432
Member
- Location
- Carmarthenshire
Plenty of choice on the BFF marketplace. Quite a few things to measure up before you buy, the fittings both ends, the closed and extended length , if your tractor requires a relatively short top link, the stroke of the hyd ram will be less. And the diameter of the cylinder determines the load rating.
- Location
- Huntingdon, UK
Sorry ?
Farmer-George
Member
We first had one on an ex demo we bought. Was dubious about it initially but they are so useful for the fine adjustment in work.
It does save time, not stopped 3 times to get the plough just right, also if it needs a little tweak you do it instantly rather than waiting to get to the end.
It does save time, not stopped 3 times to get the plough just right, also if it needs a little tweak you do it instantly rather than waiting to get to the end.
- Tags
- fertiliser harrow puma soiler