Zebbedee
Member
- Location
- Scotland in the best bit
Bit of fibreglass matting and some resin sort that but new shell on eBay might be worth a looke,,,
Batteries-only ever had the 5 amp ones, are the 5.5 amp ones worth getting over the 5? And are the 8s worth getting over the 5? Used for drill, impact driver, big 1/2 impact wrench and grinder, missed out on the deal ace found me last month as other priorities over took the upgrade requirements and wondering if I should be spending even more and upping the battery "oomph" at the same time as I currently have 3 5amp (4 if I ever find the missing one) and would want to get another 2/3 batteries when I upgrade
Tool tether for an Angle grinder,or a £6 99 tool tether
But found if you put it down, with contact with something under the handle, it could burst into life, never put it away with batteries connected.thought the switch is a 2 touch so they cant come on by accident , and the tether should be set so it dont dangle near a leg , also had not seen it was a grinder
read somewhere that the new 3amp high output will in most cases do as well as the old 5amp. but a good deal lighterthe 5.5amp and the 8amp have better cells for more oomph, the 5.5amp is i think the same size casing at the 8amp?? or very close.
Problem with them is the 5.5amp battery sticks out more so you cant get so close to the work with a drill or impact gun.
for example IF i put my 5amp on my 3/4" impact with a deep 32mm socket the battery will just clear the tyre/rim on most manitous, the 5.5amp wouldn't. Its the ONLY downside really other than the higher price.
A bungie cord would have saved thatDon’t think warranty will cover this. View attachment 1016434
Just utilised this myself to spend more money than I intended to but hopefully got the right gear
Yes, but couldn’t have a bungy tangling up around me, man basket, scissor lift. And the job in hand,A bungie cord would have saved that
Ok, it might be time to join the red club.
I’m not needing a drill/driver at the moment, but I keep finding a need for a Sawzall equivalent. Any thoughts on the M18BSX? Kit with 2 x 5A batts & charger on Powertoolmate.
Having moved from bosch blue fairly antique stuff, the two things I find really unforgivable on the milwaukee tools is, the really poor battery attaching, they are always loose, and fiddly to remove with gloves on.
Worse though is the positioning of the forward reverse switch on the impact and drill driver, I'm always hitting it by mistake mid drive, which can't do the gearbox any good.
In 64 yrs never walked on the beach on my birthday, View attachment 1014510View attachment 1014512
Thank you for this notification.
Thank you for this notification.
It has proven to be expensive - 10% off just tempted me to buy items I wasn't ready for yet.....