Isobus sectioncontrol hardi 6500

[fromfinland]

Hello from cold Finland. I hope that someone here could help. I am now using a hardi sprayer with an hc6500 controller with a jobcom and trimble cfx750 sectioncontrol. I bought new tractor with isobus and integrated autoguide and section control. Can i use valtras sectioncontrol an old non isobus sprayer? If i can, what kind of cable i need? There is in the tractor cab 9pin isobus socket. The manufacturer knows nothing about it.
Thanks for the answers.

 

[Northern farmer]

You cannot use your ISOBUS screen for section control on a non-ISOBUS implement.

Reading the Hardi manual I struggle quite a bit but they say that you can have section control from the HC6500 controller with "a small box connected to the HC6500 and a GPS receiver". Are you currently using this "small Hardi box" or a Trimble section control interface box? If you were using the Hardi section control box, you would likely be able to continue with it. Just take the NMEA feed from your tractor NMEA port.

Might be useful to clarify what you mean with "HC6500 controller with a jobcom"? Is it the controller within the sprayer?

 

[fromfinland]

In my mind jobcom is some kind of circuitboard in sprayer controlcenter, not in the cabin. If sprayer has a jobcom, trimble can control directly hc6500 only one cable deutsch to db9,trimble field iq not needed. This is my cofiguration now. I dont have "a small hardi box"

 

[Richard Smyth]

It might be possible.

https://www.homburg-holland.com/uploads/brochures/SmartSOLUTIONS_ENG_DEF_Zonder_snijttekens.pdf

The smart control is an isobus bridge which allows non iso implements to be controlled from a isobus display. The Hardi 5500 controller is listed, would be worth asking if the 6500 is also compatible.

 

[Soon_60]

Might be an ISOBUS bridge also available from Hardi.
https://lantmannenagro.fi/ has all the manuals.
Ask you Hardi dealer...