Jcb 8250 Power Beyond

[Phil Wolf]

I have recently acquired a JCB 8250. The tractor is not plumbed with power beyond. The implement I would like to pull with it requires power beyond with a load sense.
My question is, does anyone here have knowledge of where to connect the load sense on these tractors? Is there a kit from JCB?
I think I could easy enough tie into the pressure side of the system for hydraulic flow and the tractor has a free flow connection back to the tank. I just need a load sense.
I am in the U.S. and these tractors are not real common here, so dealer knowledge is not the best at this kind of thing.
Thanks in advance for any advice!

 

[alomy75]

I have recently acquired a JCB 8250. The tractor is not plumbed with power beyond. The implement I would like to pull with it requires power beyond with a load sense.
My question is, does anyone here have knowledge of where to connect the load sense on these tractors? Is there a kit from JCB?
I think I could easy enough tie into the pressure side of the system for hydraulic flow and the tractor has a free flow connection back to the tank. I just need a load sense.
I am in the U.S. and these tractors are not real common here, so dealer knowledge is not the best at this kind of thing.
Thanks in advance for any advice!

They’re not very common here either; they definitely were not JCB’s finest hour… as such I certainly wouldn’t even attempt to convert it if it hasn’t got power beyond already fitted.

 

[Agriimark]

think @CPF used to run them he might know.

 

[CPF]

I think you can, I think it’s already on the Valveblock you will need some parts to do it
Ring Dan 07581 062079
Was my mechanic
Then worked for JCB

 

[grass man]

They’re not very common here either; they definitely were not JCB’s finest hour… as such I certainly wouldn’t even attempt to convert it if it hasn’t got power beyond already fitted.

What was wrong with them? I thought the sisu / fendt combination was good

 

[alomy75]

What was wrong with them? I thought the sisu / fendt combination was good

Must admit no direct experience; just picking up from talk on here and the odd one or two I’ve known of not being without their issues

 

[s~~t shoveller]

Same kit available that you use for a 3230 etc from jcb or just make up the hoses and fit the part to the valve block

 

[s~~t shoveller]

8250 Spare Parts

JCB Parts

parts.jcb.com

 

[s~~t shoveller]

I think you may just need to fit 22 to the valve block and then fit the hoses as per diagram if I remember rightly

 

[s~~t shoveller]

I have recently acquired a JCB 8250. The tractor is not plumbed with power beyond. The implement I would like to pull with it requires power beyond with a load sense.
My question is, does anyone here have knowledge of where to connect the load sense on these tractors? Is there a kit from JCB?
I think I could easy enough tie into the pressure side of the system for hydraulic flow and the tractor has a free flow connection back to the tank. I just need a load sense.
I am in the U.S. and these tractors are not real common here, so dealer knowledge is not the best at this kind of thing.
Thanks in advance for any advice!

 

[Phil Wolf]

I think you may just need to fit 22 to the valve block and then fit the hoses as per diagram if I remember rightly

Thanks for the advice, however I am in the US and for whatever reason JCB has their parts and service info unavailable to us.
But, After some research and experimentation, I tied into, or tee'd into, the load sense for the remote hydraulics block and things seem to work as they should.
Thanks again for the feedback!