Lely polymat

[Ic6718]

Anyone have experience with lelypolymat and lely elink. Bought one in spring and sown around 20 acre with it no issue. Got it out today to run calibration before taking it to the field and can’t get the elink controller to work. It boots up fine to the home page then the buttons won’t work

 

[Spencer]

@FarmerBruce
Didn't you used to run one many moons ago...?

 

[Suppin Diesel]

Had one on our old drill, but went out with a puff of smoke. Replaced it with an RDS system as Lely was a fortune to repair.
Sorry can't help any more.

 

[serri]

Anyone have experience with lelypolymat and lely elink. Bought one in spring and sown around 20 acre with it no issue. Got it out today to run calibration before taking it to the field and can’t get the elink controller to work. It boots up fine to the home page then the buttons won’t work

Anyone have experience with lelypolymat and lely elink. Bought one in spring and sown around 20 acre with it no issue. Got it out today to run calibration before taking it to the field and can’t get the elink controller to work. It boots up fine to the home page then the buttons won’t work

Had similar issues with mine and it wasn’t getting a full 12v supply. David King Electronics can usually sort them out.

 

[Will 1594]

Had similar issues with mine and it wasn’t getting a full 12v supply. David King Electronics can usually sort them out.

they are in a resin cannot get into them had one years ago
had a mind of its own
was an art to use
would calibrate ok but area meter and tramlines some days would turn it on and would say you done 35000 acre
if you have bother
either find mechanical drive or stick 4.5 k of art i’m is on it or scrap it
boards where over a grand 10 year ago

 

[Ic6718]

Had similar issues with mine and it wasn’t getting a full 12v supply. David King Electronics can usually sort them out.

Ok had another go with it today and the start/stop button doesn’t buzz like the others do but I did manage get it drop seed for few seconds then it shut off due to fan being off. Wondering if it’s the controller what’s the issue

 

[FarmerBruce]

@FarmerBruce
Didn't you used to run one many moons ago...?

Nope.

 

[Spencer]

Nope.

Thought you did when we were at college

 

[FarmerBruce]

Thought you did when we were at college

Not elink