-
Welcome to The Farming Forum!
As part of this update, we have made a change to the login and registration process. If you are experiences any problems, please email [email protected] with the details so we can resolve any issues.
metcalfe points/ simba
- Thread starter limmyman
- Start date
average farmer
Member
- Location
- North Notts
Just bought this but not used it yet. Bit of a mix of tines, thinking of putting another tine bar under . See howit goes in the spring
From Harry Horrell?Just bought this but not used it yet. Bit of a mix of tines, thinking of putting another tine bar under . See howit goes in the spring
average farmer
Member
- Location
- North Notts
yes ,
alomy75
Member
How did this go in the end?Just bought this but not used it yet. Bit of a mix of tines, thinking of putting another tine bar under . See howit goes in the spring
average farmer
Member
- Location
- North Notts
It’s all together now and ready to go but not drilled anything with it yet . Might try a few oats as a cover crop this backend,
alomy75
Member
Did you use it in the end?
average farmer
Member
- Location
- North Notts
No, did everything with the vaddy but still got 100 acres or so that could go in if we can get on . I’ve been trying to talk my dad into using it on the crawler while I’m spraying .
alomy75
Member
That would be awesome; no paddling round the ends…no wheel marks…
Nearly
Member
- Location
- North of York
Bought a 3m freeflow with metcalfe points on in June. Drill was 250 miles away even though Metcalfes are only 3 miles away. 
Drilled 30 acres 3rd barley in dry conditions mid Sept.
120hp at 1200rpm 5.5kph.
I might have to look into replacing the spring legs if I want to go any faster. I broke 3.
Drilled 30 acres 3rd barley in dry conditions mid Sept.
120hp at 1200rpm 5.5kph.
I might have to look into replacing the spring legs if I want to go any faster. I broke 3.
