• Welcome to The Farming Forum!

    As part of this update, we have made a change to the login and registration process. If you are experiences any problems, please email [email protected] with the details so we can resolve any issues.

MF 40 digger slew motor

Simon,

The MF 40 Parts Book I have is Publ. No. 819 605 M1 (Issue 1) 9/71. It has three sections (A) Tractor Unit, (B) Digger Unit (formerly MF 220/7) and (C) Loader Unit.

Anyway, not to matter. Hopefully the attached scanned pages (provided both as jpg images & pdfs) will provide you with the information needed ...... apologies for the quality but difficult to get the book to lay flat on the scanner. You can just about make out all the numbers on the parts list.

Strange thing! Regarding your Slew Post Bottom Bearing (Item 44 on the drawing) it's marked up as Part No. 870 830 M1 up to machine serial no. C 11807, but Part No. 873 021 M1 from m/c serial no. 11808 onwards. Nothing strange in that, but you'll see there's a typo in the parts listing.

Anyway hope all this helps. I needn't feel guilty now!
 

Attachments

  • MF 40 Pivot Post & Mast.2.pdf
    409.6 KB · Views: 0
  • MF 40 Pivot Post & Mast.1.pdf
    474.5 KB · Views: 0
  • MF 40 Pivot Post & Mast.1.jpg
    MF 40 Pivot Post & Mast.1.jpg
    260.4 KB · Views: 0
  • MF 40 Pivot Post & Mast.2.jpg
    MF 40 Pivot Post & Mast.2.jpg
    194.5 KB · Views: 0

Simon_F3

Member
Mixed Farmer
Andy, you are a star! Thank you very much - that will certainly help me to source/make the necessary pieces of the jigsaw to get the back actor working again. And there was never any need to feel guilty!

I'll get on the Agrimanuals and see if they can source the full book. It never occurred to me that it might not cover the 'extra' bits!

Anyway, thanks again - really appreciate your help.
 
Andy, you are a star! Thank you very much - that will certainly help me to source/make the necessary pieces of the jigsaw to get the back actor working again. And there was never any need to feel guilty!

I'll get on the Agrimanuals and see if they can source the full book. It never occurred to me that it might not cover the 'extra' bits!

Anyway, thanks again - really appreciate your help.
No problem .... happy to help. ... the full manual is nearly 30 mm thick so make sure you get the whole thing. ... It does all have the same Publ. No.
 

Simon_F3

Member
Mixed Farmer
Just remembered to report back on my dealings with Agrimanuals - I ordered the parts book for the MF40, and all that came was the book for the tractor skid (no loader or backhoe).
I emailed them to ask if they would do me a deal on the other two parts books, and 2 days later both books arrived in the post at no additional cost :) So I am a very happy customer, and would thoroughly recommend Agrimanuals' customer service.
 

How is your SFI 24 application progressing?

  • havn't been invited to apply

    Votes: 30 34.9%
  • have been invited to apply

    Votes: 17 19.8%
  • applied but not yet accepted

    Votes: 29 33.7%
  • agreement up and running

    Votes: 10 11.6%

Webinar: Expanded Sustainable Farming Incentive offer 2024 -26th Sept

  • 2,559
  • 50
On Thursday 26th September, we’re holding a webinar for farmers to go through the guidance, actions and detail for the expanded Sustainable Farming Incentive (SFI) offer. This was planned for end of May, but had to be delayed due to the general election. We apologise about that.

Farming and Countryside Programme Director, Janet Hughes will be joined by policy leads working on SFI, and colleagues from the Rural Payment Agency and Catchment Sensitive Farming.

This webinar will be...
Back
Top