New Holland hydraulic top link

[Haytime]

Does anyone know where I could get a hydraulic top link, with the CNH arm to hold it on the tractor when not in use? Tried the local dealer but thought their price was a bit steep. Cat3 hook implement end, knuckle tractor end, 28mm pin

 

[del_boy]

I bought one from @Dave on here a few months ago, been well pleased with it. I opted for the 11t lift fixed end in cat 3 size then use a bush if needed to reduce to cat 2

 

[Dave]

Does anyone know where I could get a hydraulic top link, with the CNH arm to hold it on the tractor when not in use? Tried the local dealer but thought their price was a bit steep. Cat3 hook implement end, knuckle tractor end, 28mm pin

Pm sent

 

[Sals dad]

Could you cut the arm brackets of a standard one and weld on new one

 

[del_boy]

I made one with some 12mm bar with a 24mm nut welded on the end then just grind the corners off the nut slightly and it fits the nh bracket a treat

 

[Wjb7030]

Pm sent

I’m looking for a similar hydraulic top link with CNH style arm to hook on tractor Any available?

 

[Dave]

I’m looking for a similar hydraulic top link with CNH style arm to hook on tractor Any available?

Yes no problem, will work you something out today

 

[Dave]

The one that was supplied to @del_boy is,

CAT3/3
660 / 950 mm working legnth, so stroke is 290mm.
Piston rod Ø D (mm):45 Cylinder Ø inner E (mm):90
Lifting force (t):11 Tensile force (t):8

CNH type top link also available

Cheers

 

[ColinV6]

Does anyone know where I could get a hydraulic top link, with the CNH arm to hold it on the tractor when not in use? Tried the local dealer but thought their price was a bit steep. Cat3 hook implement end, knuckle tractor end, 28mm pin

How much did dealer quote? Just asking as ours came on the tractor.

 

[Wjb7030]

The one that was supplied to @del_boy is,

CAT3/3
660 / 950 mm working legnth, so stroke is 290mm.
Piston rod Ø D (mm):45 Cylinder Ø inner E (mm):90
Lifting force (t):11 Tensile force (t):8

CNH type top link also available

Cheers

I have a newholland hydraulic top link on the tractor from new however it’s minimum length is about 740 mm which is too long for most implements, knuckle hole diameter is 28mm on a newholland t7.225, what would price of a cnh type one be?

 

[ColinV6]

I have a newholland hydraulic top link on the tractor from new however it’s minimum length is about 740 mm which is too long for most implements, knuckle hole diameter is 28mm on a newholland t7.225, what would price of a cnh type one be?

That looks different to mine that’s been on from new. Odd that it’s too long. Could you have disputed this with the supplying dealers?

 

[ColinV6]

 

[Wjb7030]

DO YOU KNOW THE MINIMUM LENGTH OF THAT TOP LINK?

 

[Wjb7030]

The one that was supplied to @del_boy is,

CAT3/3
660 / 950 mm working legnth, so stroke is 290mm.
Piston rod Ø D (mm):45 Cylinder Ø inner E (mm):90
Lifting force (t):11 Tensile force (t):8

CNH type top link also available

Cheers

what would be the price of cnh type with that dimensions?

 

[ColinV6]

DO YOU KNOW THE MINIMUM LENGTH OF THAT TOP LINK?

I will measure it for you tomorrow morning. I’ve certainly never had to attach anything big or small without extending it somewhat.

 

[Dave]

what would be the price of cnh type with that dimensions?

That one I've described, £375

 

[Wjb7030]

That one I've described, £375

Does that have a 28mm hole in the nuckle end for tractor pin? Can you pm details?

 

[ColinV6]

DO YOU KNOW THE MINIMUM LENGTH OF THAT TOP LINK?

Approx 670 just by measuring it on the tractor.

 

[Wjb7030]

Approx 670 just by measuring it on the tractor.

thanks, that looks like what im needing

 

[ColinV6]

thanks, that looks like what im needing

It’s a CBM link if that helps.