Mursal
Member
For anyone that didn't see them, Today At Work Post #83898 a few nice DB based sprayers click
My bucket only had one in middleDepended on which bucket width, here's one with three, some had two and some only one, but I can't recall any DB made, without, except maybe for the trip loader, and it was like using a spoon then.View attachment 628922
Does anyone know if front grill guard of a 1390 ,fit a 1490? Its an original db item ,are they multi fit or does it just fit up to the 1390? Haven't seen item myself as mate of mine picked it up in scrap and foned me if I wanted it.Depended on which bucket width, here's one with three, some had two and some only one, but I can't recall any DB made, without, except maybe for the trip loader, and it was like using a spoon then.View attachment 628922
Does anyone know if front grill guard of a 1390 ,fit a 1490? Its an original db item ,are they multi fit or does it just fit up to the 1390? Haven't seen item myself as mate of mine picked it up in scrap and foned me if I wanted it.
Its in mates van ,not going to be scrapped,a wee bit of modifying could be required if I take it,Sorry, no, 12 and 13 are narrower than 14 and 16...
Shame to scrap it though...
Would I be right in saying it would only be the mounting brackets that would need altered?been studying pics and top part should still fit round grill or not?Sorry, no, 12 and 13 are narrower than 14 and 16...
Shame to scrap it though...
Would I be right in saying it would only be the mounting brackets that would need altered?been studying pics and top part should still fit round grill or not?
Someone somewhere will know for sure,measured my own tractors earlier and the 1490 bout an inch wider on the chassis than 996 ,it being similar chassis to 1390 ,should manage to alter itUmmmm... not sure...
I recon that 14 / 16 are wider than 11 / 12 / 13... so they may be unique?
If your stuck, I'll have a measure next time i'm in the shed...
Is that a Ferrari or something like that?Have seen one very similar fitted to a Ford 6600Stolen from the David Brown Tractors Facebook page
View attachment 654572
There can't have been many of these linkages made and probably none of them made it to the UK but I like it, even if it is a bit unrefined.
Think it's Ferranti, they were maybe bought by Accord, although don't quote me.Is that a Ferrari or something like that?Have seen one very similar fitted to a Ford 6600
Could this be the same tractor?Think it's Ferranti, they were maybe bought by Accord, although don't quote me.
That's a different tractor, it has the low profile cab, one I posted has the De-luxe cab, but only a David Brown geek would know that!Could this be the same tractor?
View attachment 654634
I defo couldn’t have told the differenceThat's a different tractor, it has the low profile cab, one I posted has the De-luxe cab, but only a David Brown geek would know that!
The shape of the bonnet below the windscreen and the position of the side lights/indicators is how I could tell they had different cabsI defo couldn’t have told the difference
Hello,1212 was the first DB to have a spool as standard fitment, I gave £13,000 for a 1690 4WD in 1984 A819PUM included 2 spools as standard, ARM pickup hitch, Radiator Guard.
1490 2WD WCX94X 1982 came with 2 spools and DB PUH two piece lower window, 1490 DHD331Y same spec except ARM hitch and now had one piece lower window, not one of the 90's came with an assist ram.
Also the later 1490 had newer style rear wheels, because the early models had been tearing the fixings off the wheel rim, the earlier tractor had the wheels replaced under warranty, after a lot of arguing, all they wanted to do was a lot of welding on the old wheels, If I remember it correctly this was only on 16.9 x 34s and the 13.6 x 38s did not have problems. And I also think now that one spool was standard but I specified two on both 14s.