I was thinking the easy to keep clear work bench with no top was cheating a bit on this thread.Or evidence of a spirit level on the third pic?
I was thinking the easy to keep clear work bench with no top was cheating a bit on this thread.Or evidence of a spirit level on the third pic?
I was thinking the easy to keep clear work bench with no top was cheating a bit on this thread.
Dress code qualifies though, green wellies let you in everytime.
Surely the couple of stray straws on the floor , under where he is welding must give him a few extra points ??
A lovely weld , by the way.
But if they did that commercially it would be a bodge because it would last too long before they could sell another. The thought of anything in this thread being sellable though scares even meYour all missing the point, surely ........
It's an improvement, made stronger and better than the original, will far outlast a standard item, will see the changing of many different handles and heads, such is it's strength, its clearly far superior to that which it's replaced! .....i.e., not a bodge.....
I rest my case....
Haha I never thought about it being easy to keep clear, it's a previous project that never got finished now just use as a work benchI was thinking the easy to keep clear work bench with no top was cheating a bit on this thread.
Haha I only took the picture on the good sideAHH HERE now com'on............WELDING sure that an engineering process and if the rule of the "clamp " is applied it definitely not a bodge.........................now a seam of bird Sh1t that will qualify .............I think.....................HOPE
Sounds like you've got some confidence in this haha, I did say to dad I'm hoping it outlasts himYour all missing the point, surely ........
It's an improvement, made stronger and better than the original, will far outlast a standard item, will see the changing of many different handles and heads, such is it's strength, its clearly far superior to that which it's replaced! .....i.e., not a bodge.....
I rest my case....
That's no good, who will use it then?I did say to dad I'm hoping it outlasts him
I never thought about that, might just have to weaken it a bitThat's no good, who will use it then?
Much better to use tec screws. They can be used multiple times, and if they get to blunt to drill their own hole, you can pre drill with a drill bit (resharpened broken one obviously)Any body here mastered the dark art of reuseing used pop rivets.
Please let me know
White finger, from pounding away at something.trouble with metal handles ,.....you a sting down the handle
The shanks make good tool hangers when hammered into the edges of shelves, with the added bonus that it saves on straightening nailsAny body here mastered the dark art of reuseing used pop rivets.
Please let me know
Use a shortened sledge handle that you kept the last time your son broke one?Also whats best way to re shaft a hammer without useing new shafts waterpipe and broken bale spikes
ooh errWhite finger, from pounding away at something.