Thanks pal, tried a figure of 8 but couldn’t get it tight enough in between boards, maybe more practice neededTex brown. Which is just a version of a figure 8 tied under tension.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Thanks pal, tried a figure of 8 but couldn’t get it tight enough in between boards, maybe more practice neededTex brown. Which is just a version of a figure 8 tied under tension.
Strainrite have a video of tying one between chain strainers.Thanks pal, tried a figure of 8 but couldn’t get it tight enough in between boards, maybe more practice needed
Good effort.First attempt at termination knots and using crimps
Gate post wanted going in a further 12inchesFirst attempt
Gate post wanted going in a further 12inches
They'll be on the move next winter. I like to see a gate post in at least 1.4mThey went in nearly a Metre, machine just couldn’t push them any further. Should have put in a pilot hole first or soaked the ground. They certainly aren’t going anywhere.
They'll be on the move next winter. I like to see a gate post in at least 1.4m
for those of us still imperial that is 4'6''They'll be on the move next winter. I like to see a gate post in at least 1.4m
my son used to say, in school all the "hambones" still use imperial measurements!for those of us still imperial that is 4'6''
I have a 3 foot gas pipe only 1.2 under the surface here. If we get any posts in 2 foot 6 we think we are doing well here. Anything more needs a digger.They'll be on the move next winter. I like to see a gate post in at least 1.4m