Thanks pal, tried a figure of 8 but couldn’t get it tight enough in between boards, maybe more practice neededTex brown. Which is just a version of a figure 8 tied under tension.
Thanks pal, tried a figure of 8 but couldn’t get it tight enough in between boards, maybe more practice neededTex brown. Which is just a version of a figure 8 tied under tension.
Strainrite have a video of tying one between chain strainers.Thanks pal, tried a figure of 8 but couldn’t get it tight enough in between boards, maybe more practice needed
Good effort.First attempt at termination knots and using crimps View attachment 942331View attachment 942332View attachment 942333
Gate post wanted going in a further 12inches
Gate post wanted going in a further 12inches
They'll be on the move next winter. I like to see a gate post in at least 1.4mThey went in nearly a Metre, machine just couldn’t push them any further. Should have put in a pilot hole first or soaked the ground. They certainly aren’t going anywhere.
They'll be on the move next winter. I like to see a gate post in at least 1.4m
for those of us still imperial that is 4'6''They'll be on the move next winter. I like to see a gate post in at least 1.4m
my son used to say, in school all the "hambones" still use imperial measurements!for those of us still imperial that is 4'6''
I have a 3 foot gas pipe only 1.2 under the surface here. If we get any posts in 2 foot 6 we think we are doing well here. Anything more needs a digger.They'll be on the move next winter. I like to see a gate post in at least 1.4m