To fix or replace old tractor

Kazak

Member
I have a MF 575 here, does the job. Cab is rough enough and is not a comfortable tractor but starts first go, dont do too much with her.. spread a bit of muck, fertiliser, topping, lifts a few bales thats all..
Clutch needs attention and other bits but other than that she does what says on the tin.
The question is will I spend a few pounds on it, tidying her up, clutch, maybe improve the cab, tyres..,..etc
Or will I just look for something else? Is a bit of money buying a decent enough tractor for not too much work, and not knowing what you are getting could be more troublesome that what I have, so wondering whats the best option.
 
I have a MF 575 here, does the job. Cab is rough enough and is not a comfortable tractor but starts first go, dont do too much with her.. spread a bit of muck, fertiliser, topping, lifts a few bales thats all..
Clutch needs attention and other bits but other than that she does what says on the tin.
The question is will I spend a few pounds on it, tidying her up, clutch, maybe improve the cab, tyres..,..etc
Or will I just look for something else? Is a bit of money buying a decent enough tractor for not too much work, and not knowing what you are getting could be more troublesome that what I have, so wondering whats the best option.
Think you've answered your question in the last sentence. If you dont need to upgrade, then I would spend the money on the 575. As already mentioned, why buy somebody elses problems.
 

ford 7810

Member
Location
cumbria
You say it’s not very comfortable it’s likely been comfortable enough these last 40 odd years,I would,nt hesitate I’d repair it but can be expensive if you’re paying someone else to do it
 

DrWazzock

Member
Arable Farmer
Location
Lincolnshire
I’ve never bought a replacement tractor that had less faults than the one it replaced. It just had lower hours so was worth spending time on fixing. TBH though most smaller tractors produced after year 2000 are riddled with crappy eiectronic shyte that gives a lot of bother. A Massey 500 series will be a quality machine in comparison. Unless it’s done over 10000 hours and the hydraulics etc are generally worn out then I’d keep it.
 

box

Member
Livestock Farmer
Location
NZ
Economically, you're better off to keep what you've got.

The real question is though, do you want a "new" tractor? If so, knock yourself out.
 

ford 7810

Member
Location
cumbria
Dah, get away with you all, go and buy a blo*dy new 5s mf with loader and enjoy life, dont use the excuse of it doesnt do much to not spend and look after yourself, that one will the see you out.

Thank me later.

Ant...
No no no I get far more satisfaction and pride in using and looking after something for years and years than shiny paint and new numberplates characterless bloody things but I’m like that.
 

Will you help clear snow?

  • yes

    Votes: 68 32.2%
  • no

    Votes: 143 67.8%

The London Palladium event “BPR Seminar”

  • 8,992
  • 120
This is our next step following the London rally 🚜

BPR is not just a farming issue, it affects ALL business, it removes incentive to invest for growth

Join us @LondonPalladium on the 16th for beginning of UK business fight back👍

Back
Top