Tractor Boy
Member
- Location
- Suffolk
Not fixed. Just lay it on the floor to the right of the throttle pedalIs it fixed and where do you have it without it getting in the way?
Not fixed. Just lay it on the floor to the right of the throttle pedalIs it fixed and where do you have it without it getting in the way?
What coloured wires go into pins 10 & 11? Green and white?Sonalert uses Pin 2 and 10, so the remote switch then has to use pin 8 and 11.
If you don't use Sonalert then Pins 10 and 11 for the switch.
Doesn't matter.What coloured wires go into pins 10 & 11? Green and white?
Yes.Thanks. So just leave the white one left out then?
It will only work in Port A or the Port replicator plug on the loom. Port B think you need pins 8 and 11.I am using pins 10 & 11 and engaged remote switch but still not working. Anything else I can try to make the footswitch work?
And you have activated remote switch on the engagement menu?I am using pins 10 & 11 and engaged remote switch but still not working. Anything else I can try to make the footswitch work?