Vicon 120 x90 baler opinions

[Dan Attle]

Hi all been to look at a 2008 Vicon 120x90 square baler with 60,000 bales just wanting peoples opinions on one weather there a good baler and best place for parts and service in east Anglia , many thanks Dan

 

[d williams]

Hi all been to look at a 2008 Vicon 120x90 square baler with 60,000 bales just wanting peoples opinions on one weather there a good baler and best place for parts and service in east Anglia , many thanks Dan

I’ve 120x70 good baler Kuhn John deer same parts for mine but it’s a 2009

 

[Dan Attle]

I did wonder if jd parts fit as it had green needles

 

[d williams]

I did wonder if jd parts fit as it had green needles

depends on build date I would think mine would be one of the last before Kuhn jd bought out vicon kervnland dealers can still or could get parts also

 

[Beekeeper21]

IF You talking about Vicon Baler series RV 2160 or RV2190 (under name Kuhn or Kubota ) its nice baler sometimes problems with *no Connection between controller * chip pca82c250 or processor Fujitsu MB90F3XX Both chips I have and I repair that matherboards , If Your controller unit broken I could reprogramming that baller for Kuhn AT10 controller . If You wondering how looks motherboard -let me know I could make picture (I have one for repairing ) .Regards from Poland

 

[Beekeeper21]

Board after microprocessor replacing

 

[Beekeeper21]

Foto from both controllers KuhnAT10 ,and Vicon (kverneland ,or Greenland or Kuhn or Deutz ) If controller will be the same - baler is the same under different brands .

 

[glasshouse]

Hi all been to look at a 2008 Vicon 120x90 square baler with 60,000 bales just wanting peoples opinions on one weather there a good baler and best place for parts and service in east Anglia , many thanks Dan

Did u buy it?

 

[Emil]

IF You talking about Vicon Baler series RV 2160 or RV2190 (under name Kuhn or Kubota ) its nice baler sometimes problems with *no Connection between controller * chip pca82c250 or processor Fujitsu MB90F3XX Both chips I have and I repair that matherboards , If Your controller unit broken I could reprogramming that baller for Kuhn AT10 controller . If You wondering how looks motherboard -let me know I could make picture (I have one for repairing ) .Regards from Poland

Can

IF You talking about Vicon Baler series RV 2160 or RV2190 (under name Kuhn or Kubota ) its nice baler sometimes problems with *no Connection between controller * chip pca82c250 or processor Fujitsu MB90F3XX Both chips I have and I repair that matherboards , If Your controller unit broken I could reprogramming that baller for Kuhn AT10 controller . If You wondering how looks motherboard -let me know I could make picture (I have one for repairing ) .Regards from Poland

Can i have your email

 

[Beekeeper21]

Would you be willing to provide your email address on a public forum? - I'm not willing to do so. If you want to consult something, write a private message