Will I pull it !

[Landrover]

Would my NH t7 230 (190hp or thereabouts) pull a 7 furrow wagon plough on light/medium ground with the odd heavy bit ? Not deep ploughing

 

[ACEngineering]

Would my NH t7 230 (190hp or thereabouts) pull a 7 furrow wagon plough on light/medium ground with the odd heavy bit ? Not deep ploughing

i could pull 3 furrow on medium with nuffield 10/60 easy (60hp) so yeah 190hp with 7 no problem

 

[nick...]

Easy I’d have thought.my 6620 Deere 125 hip at a guess manages 5 furrow Kuhn reversible on some stiffish land here.
Nick...

 

[Boohoo]

You'll probably need to buy another 2 furrows

 

[2wheels]

well a ransomes tsr 108 3furrow used to bring our ford 7600 (97 hp) to it's knees.

 

[Bury the Trash]

Would my NH t7 230 (190hp or thereabouts) pull a 7 furrow wagon plough on light/medium ground with the odd heavy bit ? Not deep ploughing

Should do, and Comfortably.

 

[Pennine Ploughing]

well I pulled a 4 furrow set at 16" on heavy land pulling a furrow press as well, all with sub 100 hp, no bother at all,
remember a badly set plough takes half as much again power wise to pull, than a plough well set,

 

[d williams]

Would my NH t7 230 (190hp or thereabouts) pull a 7 furrow wagon plough on light/medium ground with the odd heavy bit ? Not deep ploughing

Yes

 

[norse]

Yes you should pull it no problem,we pull a 6x17" furrow Dowdeswell dp120 on a T7.250 on some very stiff land at times and it copes well.

 

[Wheatonrotty]

We used to pull a 7f besson behind an MF 3690 (190hp) on fairly heavy clay. It was fairly steady but ok.

 

[goodevans]

Yes it will ,used to pull a Gregoire 7 furrow semi mounted vari width on undulating medium to heavy land with a nh6080 but must say now using a 6 furrow mounted vari width on a t7 235 and it is a lot better job ,especially the headlands

 

[lloyd]

Would my NH t7 230 (190hp or thereabouts) pull a 7 furrow wagon plough on light/medium ground with the odd heavy bit ? Not deep ploughing

Flat or banks?

 

[Tubbylew]

 

[HarryB97]

Weight it up and let the tyres down, may struggle ploughing on land if it's greasy at all but in furrow will walk away with it

 

[Al R]

Used to pull a KV RB100 6f (semi mounted - shearbolt reset) at 20” wide with a JD 7710 at 14kph all day long on flint with some very heavy patches. I take it waggon plough would be similar in that it takes a lot less draught than a full mounted!

 

[Landrover]

Flat or banks?

Some hills/banks but tend to work across them to stop runoff

 

[Al R]

Some hills/banks but tend to work across them to stop runoff

Get a hydraulic front furrow adjustment and it’ll match up brilliant!

 

[lloyd]

Some hills/banks but tend to work across them to stop runoff

Going by your soil type and depth ,type of plough should be fine.

 

[Landrover]

Thanks for replies so far, a quick question about semi mounted ploughing, how do you do the headlands ? Getting into the corners for example ? Do you leave a headland right around and plough them like that ?

 

[Al R]

Thanks for replies so far, a quick question about semi mounted ploughing, how do you do the headlands ? Getting into the corners for example ? Do you leave a headland right around and plough them like that ?

I did but I also did with fully mounted for years after using the semi so you never had to reverse apart from 5-10 metres to tack across for the next pass. The beauty with semi mounteds is your ins and outs arnt 7 furrows long but effectively a 4 and a 3 or 3 and 4 so a lot tidier.