cosmagedon
Member
- Location
- North Wales
I was looking at a friend's NH T7 today, it's steer ready and he's fitted a Nav controller and antenna. Dealer has updated all the software, fitted a new angle sensor and calibrated it.
He's tried using the auto steer, it worked ok for a couple of runs then started missing strips.
I've looked at it today, fixed some other things on the tractor then calibrated the steering once again, everything calibrates fine however after a few mins I try to set another ab line and it won't follow it, it's visibly missing the line by a meter or more even though the cross track error is minimal.
It's currently on Egnos, does this sound like a signal issue? I was thinking of getting a RTX trial and test it again to see if there's any difference.
He's tried using the auto steer, it worked ok for a couple of runs then started missing strips.
I've looked at it today, fixed some other things on the tractor then calibrated the steering once again, everything calibrates fine however after a few mins I try to set another ab line and it won't follow it, it's visibly missing the line by a meter or more even though the cross track error is minimal.
It's currently on Egnos, does this sound like a signal issue? I was thinking of getting a RTX trial and test it again to see if there's any difference.