Search results

Got a galvanized roller door here and it's starting to rust where it rubs together as it's rolling up.what would be the best way to prolong the life of the door.anyone used a rust convertor and a cold galvanizing product like zinga or a good quality paint?

Mate has a 7840 and pipe burst from hyd pump to orbital unit.took off the pipe and got new one made the next day and now he has zero flow from the hyd pump..anyone came across this before? Thanks all...

Anyone any tips on the cover gasket on these pumps.changed the o rings on the stopper shaft the weekend and used new gasket putting the top cover back on but this evening I can see a slight weep around it

Anyone know if a te20 or a dexta front axle cradle will match up to the 3 cyl Perkins mf35?

Anyone ever do this.field coil is damaged and can't get a 220v one but I can get a 110v version.it seems to be the same armature listed for 110 and 220.is there anything else I should look at or check?

Anyone come across one of these that 8 out of 10 times the driver can't release the pipes when changing implements? No matter what he does with lever,tractor running or not. Nothing seems to work.i gave him two old style quickfits to plug into his push pull connections to see would that to...

Hi all.anyone that has or uses wipers/lickers...what do ye think of them?? If he were to get one made what would ye include in the spec or what would ye change from the normal? Any thoughts welcome! Thanks...

Anyone ever paint/seal a slate(manufactured) roof.slates on parents house are gone very shabby looking and considering painting them if it's a good job.would it help to seal the roof too?

https://www.powertoolworld.co.uk/dewalt-dcf899n-18v-xr-high-torque-impact-wrench-body-only

Friend has asked me to give him a hand roofing a small lean to he has put onto the back of his shed.one side of the lean to is at an angle.all will be fine until the last 3 roof sheets that will b cut to suit the angle of the shed.how will the side flashing work out on something like that? I...

Anyone any advice good or bad,one to look for or ones to avoid, 4 cylinder 35 with engine trouble,lad that owns it has got a few quotes to rebuild it and its crazy money and still might not be a success, his next idea is to graft an engine from something else into it as a winter project,he...

Looking for some lights for around the yard,ideally ones that are lit up dim and brighten up when a pir sensor is triggered, must be led too,am I asking for the impossible...thanks all...

Anyone have a recommendation for a sun holiday in September for two adults and two kids,4 yr old and 2 yr old,flying into Malaga,Alicante or Faro preferably...

After a spin out this evening to change a wheel for sister in-law got me thinking.anyone recommend a compressor to have left in car to pump a flat tyre, nothing mad dear but not Chinese rubbish either.In local motor factors lately I seen a inverter booster pack,not much bigger than a smart...

Evening all,neighbour call this evening and asked would I be interested in putting a hydraulic cross shaft and lift arms in his tractor for him! What would I be letting myself in for? Anyone done one lately and have it fresh in their mind? He will supply the parts and was wondering should he go...

House needs new front door so before I go shopping around anyone any tips or advice? Things you would do different if u could.PVC/Composite,which is the best? Thanks in advance..,

Have a flatbed trailer here with the original tail lights still in place,the old bulb style inserts need changing now,what im wondering is can I get led inserts to put into my housings to keep the original look of the trailer,anybody done similar or can think of a way of doing it I'd love to hear..

Anyone here got any of these on their house or sheds and give us a report on them,good or bad...ta..

In southern Ireland here.currently have swb land cruiser here which I love but the need for seats is getting the better of me.I'm a PAYE worker and from what I hear its getting very hard or even impossible to get commercial tax without having tax clearance certs and vat numbers etc.then the...

Anyone know anything about these,good or bad,looking around an 08-10 plate with the 2.0 engine..