CX 8070 Drum variator not moving. no sign of leaking oil externally. waiting for Mechanic to arrive. Does anyone know anything i could try in the mean time. is there a fuse/relay for this? thanks
Looking for some help, we have a TM220 2010 which ever since we have owned machine the 40k has not worked. A few people i have spoke to have said there was a common failure with these early machines but no one seems to know what needs fixing/replacing. Any advice/pointers would be very welcome...
I have a Taarup 306 mower which needs a couple of bearings in the bed. Ive managed to identify the bearings which sit between the rotas but the bearing nearest the gearbox which sits in the bolted on housing im struggling with. does anyone know where i can source one from? thanks
Looking to reduce fertiliser costs etc. Have been offered some FYM (Slurry) from Local farm which they will also spread. (About 800t) What sort money should I be offering in the current climate?
Thanks
Our agronomist only ordered 54t of liquid Fert 26 5 instead of 75t we asked them to order back in September. 21t short! which has now doubled in price.
In order to sort the requirements out for this cropping year they have proposed using Liquisafe and Efficient N28 to plug the shortfall of 21t...
Our agronomist only ordered 54t of liquid Fert 26 5 instead of 75t we asked them to order back in September. 21t short! which has now doubled in price.
In order to sort the requirements out for this cropping year they have proposed using Liquisafe and Efficient N28 to plug the shortfall of 21t...
Looking for any suggestions. This video was taken without header on. We have cut 100 acres since this has been happening. Oil level has not dropped. We have changed both fuel filters. We did have fuel issue before this started happening but was solved with filter change by tank. When in...
Looking for any suggestions. This video was taken without header on. We have cut 100 acres since this has been happening. Oil level has not dropped. We have changed both fuel filters. We did have fuel issue before this started happening but was solved with filter change by tank. When in...
JCB 2014 TM320S- In need of some more suggestions. Tapping/surging sound occurs once machine warmed up. its coming from priority valve and appears to pressuring one of the hoses on and off with noise. I have fitted new brake accumulator and new pressure transducer sensor in priority valve...
Looking for some help/pointers with my JCB 320s . The hydraulics started pulsating when not in use with a tapping noise. This stops when you use joystick but returns as soon as you let go. The tapping sounds like its coming from under floor but could be anywhere to be honest.
Any thoughts...
Does anyone know where i can get hose expander to help fit new hoses to top of kuhn venta drill. I've tried hot water and blow torch but having no luck so guess i need to find an expander unless anyone has any bright ideas? thanks
Does anyone know where I can buy a top link sensor kit for drill tramline trigger and does anyone have a picture of how this is setup. I’ve got the old sensors of the markers and was wondering if I could use these on the top link some how instead? Thanks
Arc welder seems to have developed fault. It’s turned into what I can only describe as a cheap sparkler.
Is it ready for the bin ? Or can it be simple cheap fix ??
it’s a thermalarc 175se 5y old little use
Looking for some help.
I am looking to convert kuhn drill to be driven by hydraulic fan. Kuhn want £2200 which seems rather excessive!
Ive read the various discussions on here and contacted hydrokit as others suggested which have sent through this - anyone know which kit i should be buying as...
Need some suggestions.
Re: JCB 320S boom not extending or retracting on/off fault
The boom sometimes refuses to extend, especially after start up. If you restart it sometimes fixes it. If that fails, if you move locking pins it may start working again and other times nothing makes it work...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.