Search results

I’m having an issue with a 7640 wrapper. Its trowing up an error on the screen for an arm out sensor. However I have changed the sensor and the loom for the sensor and the problem is still there I have also reset all parameters on the wrappper and it’s still happening. I have also checked and...

Hello, I have bought a mchale 991b a week ago and the cut and tie isnt working right. When you press the lever it will put the presure on to close the cut and hold system however the wrapper wont allow the cut and hold system to open. I have took a pipe off and when the pipe was off i was...

Hello i have a Kverneland 7640 satellite wrapper (year 2009). I have recently started using the wrapper behind the baler and a inline system however i was looking at changing the wrapper to load sensing to try and take a bit of strain of the tractor. Currently my wrapper has just two pipes one...

Sprayed the silage ground for docking etc 3 weeks ago, however the grass is ready to cut and giving good weather here in NI. Planning to make Haylage or Hay. Is it to early to cut after spraying or do i need to leave it. Will it affect the Hay / Haylage?. The fertilizer was spread around 5...

hello, i have a mxm 140 here and over the last few weeks the break pedal has been getting a bit softer however on saturday i had next to no breaks (no brake fluid in the tank, so i have topped up the fluid and used the tractor for about 2 hours and when i was home the breaks were very soft and i...

Hello can anybody tell me the manufacture of this gearbox by this logo, I thought I was comer but it turns out it isn’t, the gearbox is out of a kverneland / vicon Tedder The gearbox is also stamped “MADE IN ITALY”

I have recently bought a kverneland 7640 wrapper and all in all a good wrapper however i find it is slower than my previous t8 The machine is 2009, i set the speed on the control box to 100% and it does about 26 -28 turns per minute, i feel like my older kverneland t8 was alot faster. By any...

Parts needed for a Tedder or i will buy a complete Tedder/gearbox for spares It’s the main gearbox where the driveshaft goes on that I need It is a fanex 763 Tedder that I have

I have just bought a Taarup 7640 at the weekend to upgrade my older t8 wrapper, does anybody know when these were made to as the man believed it was somewhere about 2008 or fresher as he bought it as a demo machine in and around 2010. Also in the settings it gives the option for slowing the...

I have recently bought a claas 780 rake and i want to check her over now rather than it playing about on me during summer. There is a bit of a noise on one rotor which i want to check out the most, what is the best or easier way to take a rotor off these rakes or is it better to dismantle the...

Well, i have a new holland 376 baler here and 90% of the time she makes banana bales, i have been told it is because she is not bringing enough hay accross to the far side of the chamber. Has anybody else got experience with this and know how to fix it?

I have bought 2 bale sledges from 2 different dealers 1 is a cooks 4 + 8 windrower type sledge and the other one is a browns compacter B (standard 8 bale sledge). I bought the browns after the cooks as i liked the look of it and i thought it looked like it would work well. Has anybody got any...

Will anybody be able to point me in the right direction to sort out a problem on my baler. It is a 2010 Lely 235 profi All in all its a great baler however i have found near the end of the year the netter is messing about when im baling wet grass. She is bunching up the net under the feed...

Can anybody tell me if Welger tines are Mchale tines are the same, as in they will fit the same tine holder. I find the Welger tines very bad and they break very easily and that mchale are a bit better.

I have a lely welger 235 profi, great baler however the tines are very weak in my opinion. I am looking to upgrade the tines to better or stronger ones. is there any tine out there thats stronger however that i wont need to change the tine holder as well. I am also going to change all bolts...

I have bought a old Massey Ferguson 25 Telehandler, they are the same as a Matbro telestar telehandler. Someone in the past has messed with the 3rd service as the cable, lever and some of the pipes are missing. I should hopefully have no problem sourcing a cable and lever however the pipes are...

We have fields ready to cut and giving a good week ahead The fertilizer was spread start of May (4weeks sowed) There’s was 2.5 bags of 27-4-4 to the acre When is the earliest i can cut I have always been told 6 weeks but is it true as it must vary on the amount you spread?

I have recently bought a case mxm 140 2003 and looking help to get a few annoying things sorted out. First of all when you let the handbrake down she beeps for a few minutes, its very annoying does anybody know what this may be and how to sort it? Also the fuel guage on the dash isnt working...

Problem started in the PTO of a 8340 yesterday, was mulching with the tractor, when a lound knocking sound starts in the pto of tractor Can anybody help me out on what the problem might be and has it ever happened anybody else Also, the loud knocking is in 1000 and 540 pto

Can any body help me out here, im thinking of going to look at a 6280 massey dynashift, i dont know anything about masseys but whats peoples thoughts and opinions on them The tractor has 9k odd hours, is this something to worry about on these and what problems do they normally have Also are...