Fendt teleporter

[Boomerang]

Just seen one in the flesh , it was HUGE, had a telescopic raising cab. Shudder to think of the cost.

 

[Blue.]

Just seen one in the flesh , it was HUGE, had a telescopic raising cab. Shudder to think of the cost.

2020 FENDT CARGO T955 For Sale in Ilkeston, Derbyshire

2020 FENDT CARGO T955 For Sale in Ilkeston, Derbyshire at www.pykett-tractorsstock.co.uk. 5.5 TON TO 9 METER TELESCOPIC CAB JCB QUICK FIT WITH HYDRAULIC LOCKING 40KM TRANSMISSION REAR PICK UP HITCH AIR TRAILER BRAKES + REAR TIPPER PIPE 600-55-22.5 TYRES AIR CON BOOM SUSPENSION ONLY DONE 515 HOURS

www.pykett-tractorsstock.co.uk

The only Fendt bit is the stickers,Fendt don’t publicise the fact it’s fitted with a Fpt engine.

 

[ollie989898]

Made by Sennebogen who know a thing or two about material handling. Won't be cheap, that is for sure.

SENNEBOGEN - MOVE BIG THINGS! | Find out more now!

Leading manufacturer of material handlers and electric material handlers, telehandlers + crawler cranes, port cranes, telescopic cranes + duty cycle cranes.

www.sennebogen.com

 

[quattro]

The cab lifting is handy when loading bulkers

 

[daveydiesel1]

Wonder fendt dont fit thier own joystick

 

[melted welly]

The cab lifting is handy when loading bulkers

Do you have one?

Had a shot of one at the docks, I’m not very good with heights, bloke said you can drive it normally with the cab raised right up, so I did and nearly shat my pants.

 

[Gerbert]

2020 FENDT CARGO T955 For Sale in Ilkeston, Derbyshire

2020 FENDT CARGO T955 For Sale in Ilkeston, Derbyshire at www.pykett-tractorsstock.co.uk. 5.5 TON TO 9 METER TELESCOPIC CAB JCB QUICK FIT WITH HYDRAULIC LOCKING 40KM TRANSMISSION REAR PICK UP HITCH AIR TRAILER BRAKES + REAR TIPPER PIPE 600-55-22.5 TYRES AIR CON BOOM SUSPENSION ONLY DONE 515 HOURS

www.pykett-tractorsstock.co.uk

The only Fendt bit is the stickers,Fendt don’t publicise the fact it’s fitted with a Fpt engine.

At least they got a sense of humour

 

[quattro]

Do you have one?

Had a shot of one at the docks, I’m not very good with heights, bloke said you can drive it normally with the cab raised right up, so I did and nearly shat my pants.

Don’t have one but had a good long demo of one
it’s very psychological, you have to start using it raised abit and go over some sloping ground
fortunately we have some concrete with quite a slope on it so started moving grain from one shed to another going across the slope and gradually kept lifting the cab abit higher until you got confidence it wasn’t going to tip over
great for loading bulkers didn’t need it full up for them

 

[FMF74]

Don’t have one but had a good long demo of one
it’s very psychological, you have to start using it raised abit and go over some sloping ground
fortunately we have some concrete with quite a slope on it so started moving grain from one shed to another going across the slope and gradually kept lifting the cab abit higher until you got confidence it wasn’t going to tip over
great for loading bulkers didn’t need it full up for them

I tried one and thought it would be more useful if you could link the cab raising with the boom raising then you could see in the lorries but not worry about clouting the shed roof every time!

 

[quattro]

I tried one and thought it would be more useful if you could link the cab raising with the boom raising then you could see in the lorries but not worry about clouting the shed roof every time!

I suppose that would be ideal

 

[Still Farming]

Been around for a while now.

 

[oil barron]

I suppose that would be ideal

No, that’s the combine.

 

[ollie989898]

You can see where the stability comes from- even the base model Sennebogen weighs in at 10 tonnes without any attachments. No wonder it doesn't want to tip over.

 

[quattro]

You can see where the stability comes from- even the base model Sennebogen weighs in at 10 tonnes without any attachments. No wonder it doesn't want to tip over.

Jcb is about 9.9

 

[ollie989898]

Jcb is about 9.9

How did the engine/hydraulic grunt compare of the Fendt compare to your JCB, you have a monster handler, no?

 

[quattro]

How did the engine/hydraulic grunt compare of the Fendt compare to your JCB, you have a monster handler, no?

It was a very smooth machine to use plenty of power
unfortunately even though it was supposed to be a Jcb backplate it wouldn’t fit our big bucket so couldn’t compare like for like machine’s

 

[ollie989898]

It was a very smooth machine to use plenty of power
unfortunately even though it was supposed to be a Jcb backplate it wouldn’t fit our big bucket so couldn’t compare like for like machine’s

Oh, that is a pisher.

Have you had a demo of a Kramer?

 

[Farmer_Joe]

cool looking thing that!

 

[quattro]

Oh, that is a pisher.

Have you had a demo of a Kramer?

Had a demo when they were in claas colours it wouldn’t entertain our bucket