Honeybee swathers

Bury the Trash

Member
Mixed Farmer
Would swathing work ok here with our crappy damp weather ?

I’d have thought it’d just get mankey in the bottom and sit there ?
turning the swath would be the next step after swathing it i guess which is much gently with less losses than spreading out . and raking back
 

Bury the Trash

Member
Mixed Farmer
Ahhh. For silage rather than cereal crop to combine…... Makes more sense !!
lucerne there i think.

always thought it would be goofd to swathj peas before the hit the deck before ripe enough to combine
but they would be subject to the prob;em ypou suggest as they wouldnt be able to be air ed up. to vulnerable to loss i guess after swathing . also need a draper header as well i suppose which aint cheap....
 
Last edited:

Flatlander

Member
Arable Farmer
Location
Lorette Manitoba
lucerne there i think.

always thought it would be goofd to swathj peas before the hit the deck before ripe enough to combine
but they would be subject to the prob;em ypou suggest as they wouldnt be able to be air ed up. to vulnerable to loss i guess after swathing . also need a draper header as well i suppose which aint cheap....
If it’s peas you won’t be able to swath tight enough to the ground without losses. Buy a flex head. They’ll shave the ground
 

Bury the Trash

Member
Mixed Farmer
If it’s peas you won’t be able to swath tight enough to the ground without losses. Buy a flex head. They’ll shave the ground
fair comment , but unless they can be cut before they go down, then left to desicate in the swath, same as in an unsprayed for weed organic situation,which is part of the idea, whereby they are cut /swathed to dry out the weed that might be there as well. thus improvingthe sample and no needing to dry them .
 

Gav

Member
Arable Farmer
Location
Norfolk
I used to be involved with the HoneyBee swathers in the UK and actually made the video linked in the first post. The newer 2022> HoneyBee swathers can put swaths out to the left, right or middle as standard or if specified correctly both sides at once from the 21’ cut ST21 model shown in the video and above. There is a smaller 15’ model but that discharges to the middle only but the cost difference is small between that one and the 21’ so not many are produced.
When I stopped being involved in 2022 there were 3 HB machines working over here.
 

Will you help clear snow?

  • yes

    Votes: 68 32.1%
  • no

    Votes: 144 67.9%

The London Palladium event “BPR Seminar”

  • 9,414
  • 123
This is our next step following the London rally 🚜

BPR is not just a farming issue, it affects ALL business, it removes incentive to invest for growth

Join us @LondonPalladium on the 16th for beginning of UK business fight back👍

Back
Top