Got an extra scraper plate with the vb I picked up earlier in year. I thought I'd fit it to save it lying about and or lost. Couldn't zoom in on diagrams to see exact position. Would anyone know if these are correct holes as it would appear it's held in by head of Allen bolts on one side and not clamped if so? Scraper is part number vgwa01595. Cheers
Kuhn vb2160 owners
- Thread starter Ploughteringindubs
- Start date
d williams
Member
That’s to help if you can’t get the bale to form only ever used on straw on a fixed chamber baler we have a 3295 belt now and never needed it yet
Thanks, it did manage the silage, hay and straw without it fine and lot quicker than previous baler.
d williams
Member
Sure there’s a place for it to live up where net lives
Thanks I will have a look, it came cable tied on too pickup gaurd. Do you know if that's the correct holes incase I ever needed it.
d williams
Member
If they at the infeed then I’m guessing yes as that’s where the fixed chamber one went I would think it will be in operator manual or visit my Kuhn and all be explained there
It is a tear drop bar. It is fitted in the holes you have at the picture. It need to be mounted with allan head screws. One side you mound the screws inside the bar before mounting. Then you can put the heads of the allan screws inside the big holes. Make sure you put the welded side below. lock the bar with the bold at the side with the small holes.