• Welcome to The Farming Forum!

    As part of this update, we have made a change to the login and registration process. If you are experiences any problems, please email [email protected] with the details so we can resolve any issues.

Lelyterra 300-33 pto speed?

marcot

Member
Arable Farmer
Location
Bury St Edmunds
Just because it has has a 6 spline end doesn't mean it should be run at 540rpm.
My Kuhn 1000 rpm machine came with a 6 spline end from new and I have changed my Lely from 21 spline to a 6 spline end to save having to change the tractor stub
 

maxxum5120

Member
Location
S W LANCASHIRE
9 mm pins are used in a 1000 rpm machine and 10mm pins are used for a 540 rpm machine but obviously 9mm pins will go into a 10 mm hole if yours will hold 10mm pins it would seem to be a 540 rpm model. Mine has a 7 spline yoke but is 1000 rpm model
 

How is your SFI 24 application progressing?

  • havn't been invited to apply

    Votes: 31 34.4%
  • have been invited to apply

    Votes: 17 18.9%
  • applied but not yet accepted

    Votes: 30 33.3%
  • agreement up and running

    Votes: 12 13.3%

Webinar: Expanded Sustainable Farming Incentive offer 2024 -26th Sept

  • 2,805
  • 50
On Thursday 26th September, we’re holding a webinar for farmers to go through the guidance, actions and detail for the expanded Sustainable Farming Incentive (SFI) offer. This was planned for end of May, but had to be delayed due to the general election. We apologise about that.

Farming and Countryside Programme Director, Janet Hughes will be joined by policy leads working on SFI, and colleagues from the Rural Payment Agency and Catchment Sensitive Farming.

This webinar will be...
Back
Top