Sprinter 10
Member
- Location
- Devon
I bet you’re far more safety conscious in a pair of safety sandals than steel toed boots!I love there work boots, sandals!!!
I did some welding in wellies once, until a bit went in, fastest I ever took a pair off. Wouldn't attempt in flip flops either.I bet you’re far more safety conscious in a pair of safety sandals than steel toed boots!
My late date had a lump of hot weld get under his wedding ring and obviously he could not get it off very quickly.made a real real mess of his finger.I did some welding in wellies once, until a bit went in, fastest I ever took a pair off. Wouldn't attempt in flip flops either.
I assumed they are wearing safety contacts, with auto darkening...Eyes must be really cheap there didn't see anyone wearing goggles,
all about timing he shuts his eyes as the arc is struck , i do that quite often when tackingI assumed they are wearing safety contacts, with auto darkening...
Well you shouldn't your eyelids won't protect your eyes from the uvall about timing he shuts his eyes as the arc is struck , i do that quite often when tacking
Not even darkened ones?!Well you shouldn't your eyelids won't protect your eyes from the uv
well perhaps ill stop that then had to replace my helmet the other day and got a nicer to wear one..Well you shouldn't your eyelids won't protect your eyes from the uv
Its whatever steel is hanging about after they scrapped the last shipI assumed they are wearing safety contacts, with auto darkening...
I wondered why they don't use box section steel as opposed to welding angle?
Sounds a bit like @Nearly , whatever's hanging about in the scrapyard.Its whatever steel is hanging about after they scrapped the last ship
Had same with my watch the other year. Nasty.My late date had a lump of hot weld get under his wedding ring and obviously he could not get it off very quickly.made a real real mess of his finger.
nick...
Nylocs don't prevent bolts coming loose in the first place. They just prevent the nut winding straight off if they have come loose.All bolts done up with plain nuts and no washers. Presumably vibration doesn't exist in India.