Tractor breakers db

[biggmw]

Anybody know of any 1594/1690 etc breaking. Looking for set of 16.9x38 wheels and maybe fronts as well if paying pallet etc anyway.

Ford wheels would do I believe as well on eight stud centres.

Based Ayrshire but can get collected.

Tried all usual suspects

 

[manfromhill]

You tried berry hill or r and l Miller

 

[Netherfield]

These two could be a long shot.


Stephen Marsden 01484 685911

Albert Hirst 01484 686504
or

Have you tried David Brown Tractor Club.?

 

[Exfarmer]

Barclay Williams, I cannot be 100% but I dont think Ford centres will fit but MF ones may.

 

[Netherfield]

Barclay Williams, I cannot be 100% but I dont think Ford centres will fit but MF ones may.

Yes Ford do fit, at least the 5000, 7000 type did.

 

[john432]

These advertise in our local agritrader magazine, www.rjagri.co.uk
Based in Pemps. Tel 07968044770
Breaking most David Browns...
There were a lot of them in West Wales at one time , courtesy of Alan Rodgers.ex Riverlea.

 

[norse]

Case David Brown 1594 1690 18.4 38 Conplete Wheels Same As Ford | eBay

Find many great new & used options and get the best deals for Case David Brown 1594 1690 18.4 38 Conplete Wheels Same As Ford at the best online prices at eBay! Free delivery for many products!

www.ebay.co.uk

 

[Netherfield]

These advertise in our local agritrader magazine, www.rjagri.co.uk
Based in Pemps. Tel 07968044770
Breaking most David Browns...
There were a lot of them in West Wales at one time , courtesy of Alan Rodgers.ex Riverlea.

Case David Brown 1594 1690 18.4 38 Complete Wheels - £395 + VAT

Case David Brown 1594 1690 18.4 38 Complete Wheels Same fitting as most fords but please check dimensions They have been taken of a 1594, will fit other 6 cylinder David browns Rims are in very good order, only one slight dink shown in photos but is only small would come easily come out Tyres...

rjagri.co.uk

 

[john432]

Does the op need centers or just the outer rims? Have a search for 38"x15" wheel rims, you'd probably get new wheel rims cheaper than £350

 

[biggmw]

Ideally looking for complete wheels with tyres. Time I source used tyres etc for rims it's could be dearer than a miserable b like me would like!!

It's a project to put onto a 1412... 16.9 38 on back and 11.00 maybe on front

 

[john432]

Wheels • Agrispares Trading Co

www.agrisparestrading.co.uk

Have a measure up of the hub and bolt holes.

 

[Hamer5108]

Try Ron greet he has a fair selection on various makes

 

[john432]

Ideally looking for complete wheels with tyres. Time I source used tyres etc for rims it's could be dearer than a miserable b like me would like!!

It's a project to put onto a 1412... 16.9 38 on back and 11.00 maybe on front

Very often if the tyres are old,and been stood around, they will be perished , get some cheap new budget tyres.

 

[HCC]

Pocock tractors. 01747828272

 

[Boohoo]

If you're on Facebook there are a number of David Brown groups that often have adverts for parts. Ebay is a great source of parts too with a number of breakers using it to sell parts. If you can wait the things you need always turn up eventually.

 

[puntabrava]

Is not every DB owner a breaker in waiting

 

[Netherfield]

Be careful to measure the centre bore, DB used two different sizes, we'd a 1690 which started tearing the lugs off the wheel rim, I dropped on some new wheels which came out of the factory when they were shutting down, the centre bore was too big, had an engineering shop make some adaptors to weld on.

Had it been the other way round it would have been a nightmare.

 

[Boohoo]

Be careful to measure the centre bore, DB used two different sizes, we'd a 1690 which started tearing the lugs off the wheel rim, I dropped on some new wheels which came out of the factory when they were shutting down, the centre bore was too big, had an engineering shop make some adaptors to weld on.

Had it been the other way round it would have been a nightmare.

Could they have been front wheels for a vegetable special? Wouldn't have thought any other models would've had a larger centre bore than the 1690.

 

[biggmw]

Is not every DB owner a breaker in waiting

Ha.... Said by someone who doesn't like real tractors showing up new rubbish

 

[Netherfield]

Could they have been front wheels for a vegetable special? Wouldn't have thought any other models would've had a larger centre bore than the 1690.

No way of knowing, they'd the right size of tyre is all I can say.