tomlad
Member
- Location
- nr. preston
Think ive found the gnome probably facebooking
haha thanks. It's gear I've been gathering over the last few years, eventually going to strike off on my own for general engineering. ATM I have a 5ft 1/4" rated guillotine, a 2 metre 35t press brake, those 1.2m 3mm rated rollers, amongst quite a lot of gear really. We built a mezzanine flooring for the workshop last year and revamped the whole thing really.
The gnome helps out sometimes...
The free-hanging side was calculated around a 3t distributed load.Mezzanine looks good what sort of load rating would it have
The free-hanging side was calculated around a 3t distributed load.
Or tff ing ,, oh ,,, not alone is he buggerThink ive found the gnome probably facebooking
Look at that table! What a workshop.haha thanks. It's gear I've been gathering over the last few years, eventually going to strike off on my own for general engineering. ATM I have a 5ft 1/4" rated guillotine, a 2 metre 35t press brake, those 1.2m 3mm rated rollers, amongst quite a lot of gear really. We built a mezzanine flooring for the workshop last year and revamped the whole thing really.
The gnome helps out sometimes...
Here's my version for kuhn fert spreader. Can put pins in to attach spreader to base and move it around on pallet forks. Its 50cm above ground which is recommended spreading height for kuhn on most things so make sure I pick it up level.No words needed
Castors online are a good source. Those 4 were £40 If I remember correctly. The wheel changer in the background got a new set of castors too.@Chae1 that's definitely better than mine! I wish I'd put a back stop on it now, because the tractor picks it up on the links before the top link goes on.
The castors are a bit on the weak side too.
Still better than pallets.
Want some pneumatic wheels, hubs , for a 4 wheel Trolley, on bearings ideally
wheel Barrow size would probably do it , supplyers ??
Nice work.Made this back plate, means I can fit my grain bucket on my digger arse about tit for loading muck spreader , worked really well. Oh and I refurbished the old slewtic bucket while was on . View attachment 886146View attachment 886148View attachment 886152
What for ?Nice work.
But don't forget to power wash the bucket afterwards, disinfect it then record it all in the little black book!!!
Any pics without spreaderHere's my version for kuhn fert spreader. Can put pins in to attach spreader to base and move it around on pallet forks. Its 50cm above ground which is recommended spreading height for kuhn on most things so make sure I pick it up level.
View attachment 886165
Farm assurance recordsWhat for ?
Don't have any. Will take some next time it's on. Probably be next week if we get silage done. Kuhn offer fold down legs as a option, but like that one as I can pick it up with pallet forks.Any pics without spreader
I only have a grain bucket don’t actually have any grain !Farm assurance records