mccormick

Hello I Have a Deutz Fahr TTV 430 brought it new 2012 and it done 1900 hours been serviced regularly and it now doesn't like to go forwards up a slope if I am driving forwards in either High or low range and start to go up or down a hill or slope tractor sort of sounds like clutch is slipping...

Afternoon! A lovely pebble decided to shatter my RH door on a McCormick xtx200. I’m located in Canada and the local dealer wants $2000 for the glass and assembly. I just need the glass but he cannot get. Would any one have a locate on a glass that would ship to Canada for reasonable price...

Just been talking to local farmer he said local contractor recently had Fendt transmission rebuilt at a cost of £25,000 He also said full artic load of chicken feed is £10,000 I believe chicken feed cost as someone was talking on radio a few days ago not so sure about fendt transmission

Written by Justin Roberts from Agriland AgriArgo is to take a large stand at this years LAMMA show in Birmingham in the U.K next month, with the emphasis being on new additions to the McCormick side of the business. The average power rating of tractors sold on to Irish farms is around the...

Hi, I ordered a new JD 6 weeks ago with an estimated delivery of November/December. I've still not had a build date that I was told would be released soon as the order was put in. I have chased this and dealer not go it yet. Anyone else having troubles with extended build/delivery dates? I'm...

I am looking for a wiring diagram for my neighbours McCormick tractor which the factory fitted name plate shows as a Type MXCA. I have been unable to find any reference on many general and workshop manual websites to MXCA McCormick tractors with the exception of some sales sites in Turkey and...

Maybe the Govt should wake up to the fuel crisis esp diesel Ration domestic fuel to Stop the public wasting fuel on days out at the seaside , holidays abroad etc Tell public to turn their heating down Prioritise military and farmers and haulage without food to eat , the means of getting food...

Hi all. Does anyone have any experience with a jcb compact tractor. I've been looking for a little compact tractor for a small holding , would like a loader bucket attachment for it. I've been offered a 327hst model and have no experience with any tractors what so ever. been looking at the...

As above thoughts on compact tractors 35-50hp either hydrostatic or with creeper range. Kubota looks the best for quality and resale value. Thanks in advance for all suggestions.

Hi all this is my first post I am a tree surgeon from Shropshire and have just purchased our first tractor a case 4230 4x4 1995 I got it cheap as no loader but I didn’t think that was a issue I’ve since realised it’s a lit easier to buy older tractors with loaders on but hey live and learn...

Looking for thoughts on a 100hp ish 4wd tractor, as few electronics as possible. Not new - prob around 20 to 30 years old. Basically something that can be fixed with a spanner and hammer - not a computer!!

Written by Justin Roberts from Agriland Last month the Agricultural Engineers Association (AEA) released the latest sales statistics for the UK, including the breakdown by brand for 2020. Overall, total sales for tractors over 50hp in 2021 recovered from a low of 10,380 in 2020 to a much...

Written by Justin Roberts from Agriland Last month the Agricultural Engineers Association (AEA) released the latest sales statistics for the UK, including the breakdown by brand for 2020. Overall, total sales for tractors over 50hp in 2021 recovered from a low of 10,380 in 2020 to a much...

Written by Justin Roberts from Agriland If the Fordson was the major innovation that brought mechanisation to farming, it was the International Farmall which picked up where Henry Ford left off and carried on with the revolution. The name was first introduced in 1921 for a lightweight and...

Written by Justin Roberts from Agriland AgriArgo has taken its mid-sized tractor ranges up a notch with power increases and a new transmission which features 24 ratios in both forward and reverse. The main highlight in both the Landini and McCormick model ranges is the new transmission which...

I'm currently making a 3 point linkage for the rear of my unimog, it's had nothing on before. Thoughts were just simple rocker switch for up and down on the 2 lift rams. Obviously pressure to lift, and just into dump/float to lower. Perhaps some describe of valve to slow rate of drop. And maybe...

Have done valve seals and recon Turbo, drives ok but smokes but not all the while, blue smoke cummins engine. Any idea what could be wrong, thinking it might be glazed bores and hard work might sort? injector pump done and returning 140hp on shaft.

Ok so possibly looking at going down min till route for some of our land Have @ 150hp to play with What are my options Not looking new

Hi I want to remove my drop arm lift rods to replace them with sturdier ones. Does anyone know how I go about removing the pin at the top of the lift rods (arrowed in the photo) does it need an Allen key in the end nearest to the wheel? Thanks Matthew