Written by Justin Roberts from Agriland
Last Saturday (January 21) saw the clearance sale of Maguire Agri Contracts of Co. Tyrone, a firm that decided to restructure its business making much of the agricultural equipment surplus to requirements.
Around 100 lots of machinery and spares went...
We're looking at getting a wrapper and have no experience of them. And so as per title , is there much difference between these two makes and is a fully Auto worth it , we're on banks 90% of the time so wouldn't be able to have auto tip any way .
Looking at 2nd hand Mchale full Auto or brand new...
In this episode we dive into the huge halls of the NEC, Birmingham, to bring you our machinery highlights from day one of the 2023 LAMMA Show.
Featured manufacturers:
0.20: Case IH Puma 260 CVXDrive Tractor
4.55: Bednar SwifterDisc and StripMaster Cultivators
10.00: Agrifac Condor Vanguard...
Given new slurry regs we are looking at options for the future, one being moving the cows housing and going loose housed to start, with a view to cubicles down the line if we manage to milk a few more. Have a good shed, easily big enough, think it would cost 5-7k for concrete and improving...
Written by Eva Osborne-Sherlock from Agriland
Those who attend LAMMA 2023, the UK’s leading agricultural machinery, equipment and services show, will be able to see machinery and farm equipment in live demos, event organisers have said.
The event, which will take place on January 10 and 11...
The LAMMA '23 Product Guide is LIVE! From companies including Fendt, Valtra, Bednar UK, Agrifac UK, McHale, Can-Am Off-Road and many more... Be the first to know by reading the LAMMA’23 Product Guide today 👉 https://bit.ly/3PKR4x9
Am looking into getting a bale trailer, what is the ideal length for both 4 bales along the bottom and 5 bales along the bottom, am I right to be wanting a tandem axle or are single axle still very stable on the road. Is there much difference turning
Thanks
What are the pro's con's of feeding them to ewes and how soon to feed them? What are DM, protein, energy etc please. Will they replace ewe cake or delay the feeding of it?
How do you adjust the lift arm to travel further up when on auto works fine on manual but won't lift the bale quite far enough on auto to sit it on the table.
Have priced both of the above brands, they both come in at £14k. Both seam to have good reviews, both come from.local dealers. Have been told green McHale paint is poor? Our Kuhn mowers have flaked paint so thinking it's all new machinery!
Bought a teagle 404m straw mill at an auction. Knowing little about any straw chopper/bedder it was more of an experiment. It has a 20mm screen in it takes forever to chop and is a bit fine for my needs.
Question is has anyone tried a 120x40 slotted sieve in one and does it make it go any...
Have been told by local rep mchale nolonger sell this part and will have to build my own some new reg stopped em. have got drawbar to fit some other belt baler and pipes cables camera etc to run this hs2000 behind a baler, but not a hope without major welding will it fit my baler. Know someone...
My trioliet feed out conveyor joint is failing. The little staples have failed on one section on one side..
Repair kit not available locally apparently. So new belt on order ..
But need a solution pdq.
Anyone got ideas?
We are looking to bring our baling in-house and are looking for a good second hand round baler that will give us a good hard centre as we use a bale unrolled for feeding.
Can anyone point me in the direction of a baler that would fit the bill?
I’ve swapped the tractor on our kv 853 bedder from one with closed Centre to open Centre hydraulics. Is there anything I need to swap over on the bedder ?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.