I’ve never been a fan for tractors. Just have a tractor big enough, surely 🤷♂️
But, I bought a mower a couple of years after the tractor and it’s fine for second cut but at times with first cut I’m maxing at 8k. Not the end of the world but out of curiosity, when at the dealer I asked what they...
Afternoon to everyone
Looking at some new pto guards and remeber a while ago (mid 90s) looking at a big rubber type universal guard. It had fittings on tractors and machines and just fitted it over the shaft as needed.... Anyone remembrr what and where? Still can be got?
All the best
Hello, been out in the fields today with my mccormick mtx135 (T3), been reversing back while ploughing and my tractor stopped, the dash went to acc mode like if you turned the ignition key to left. The engine kept running but it wont drive, read any rpms or anything, where do I start to look...
Evening,
Does anyone have any experience of the Kubota M6 002 range?
Looking for a loader tractor which will undertake yard loader duties, mow, spread fert, slurry, mow and cart a lot of round bales. Essentially an all rounder.
Just had a 132 on demo and it's a nice enough tractor. Might just...
I need to set a constant PTO speed on our 2022 T6.180 for fert spreading and drilling, without the snazzy screen or Ground Speed Management feature.
Is it just a case of starting the PTO at required speed (e.g. 540) and then pressing the PTO mode button on the joystick?
I can't find it in the...
Written by Justin Roberts from Agriland
The joint venture between Lemken and Krone to produce an autonomous tractor will be stepping up a gear this season with the companies appearing to have now thrown their full weight behind the project.
Known as Combined Powers, the new joint division...
Kilworth 5 Foot Single Rotor Topper
Advert added by: B and B Tractors
Machinery Details
Category: Mowers Rotary Topper Price: £1200 Condition: Excellent
Description
Used Kilworth5 foot single rotor topper
PTO
shear bolt
Part galvanized
...
How to make contact...
…., and having read posts for and against, it’s not worth driving hours to look at a tractor, combine, forager or other large engine driven kit unless you really know what you’re looking at - and even that is likely subjective.
Why? Because:
What does it prove? Photos and video should determine...
Hello, I was searching tractors in the 150-200hp range and found Claas/Renault Ares Models pretty cheap, under 30k for a 200hp one and I am curious why those models are so cheap, do they have any issues? what is your experience with them?
I bought a second-hand Claas Disco 3200 Contour mower with conditioner and when the grass is wet it sticks to the bar and leaves rows uncut. Cuts very poorly in wet conditions. Will I have to change the bottom or the plates?
I putted some grass where it gets stuck when moisture.
Hi - we’ve recently purchased an old (P reg) 6800 and will be running the pto at 540e but strangely theres no indication on the rev counter as to what the engine rpm should be. Can anyone with a 6800 tell me what it should be? TIA.
I have a 6190 with stiff steering.
tractor has CCLS hydraulics. High pressure filter on right hand cover and oil has been changed.
If I press the brakes the steering immediately releases and turns normally.
The clutch, 4wd, PTO, Dynashift and lift arms all work well, and getting good pressure...
Hi,
I have a 2017 T6.145 AutoCommand.
It is currently stuck in the lower of two gears and won’t drive past about 10m/h
I have a 2019 T7 AC and I know by pressing two buttons I can lock her in low range, this T6 however does not have this option to lock it and is still displaying speed to up to...
Written by Justin Roberts from Agriland
With the latest Toppa series, Grimme believes that it is bringing a new generation of haulm toppers into the market.
Low power consumption, redesigned housing and increased suction power are the main features of the new machines.
A range of different...
Hi All,
I am thinking of making a trailer to make my wood processor mobile, I am looking for horizontal shaft engine so I can fit a spline shaft to it to drive it, any idea's or suggestions gratefully received..
What are peoples opinion/experiences with Pottinger grass kit. I am thinking about buying a Novacat mower and a 6 rotor tedder, a bit out of touch with this type of plant, the last mower we had was a 10ft trailed.
I am confident we will get a good service from the dealer. The mower would just...
What's happening is as the straw is being pulled through by the roller the engine is dying and I'm having to stop the bed quickly and allow the tractor to recover i.e get rid of the straw that's in the fly wheel and go again. The tractor is all but stalling sometimes it seems like it is...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.