Hello, I was searching tractors in the 150-200hp range and found Claas/Renault Ares Models pretty cheap, under 30k for a 200hp one and I am curious why those models are so cheap, do they have any issues? what is your experience with them?
I bought a second-hand Claas Disco 3200 Contour mower with conditioner and when the grass is wet it sticks to the bar and leaves rows uncut. Cuts very poorly in wet conditions. Will I have to change the bottom or the plates?
I putted some grass where it gets stuck when moisture.
Hi - we’ve recently purchased an old (P reg) 6800 and will be running the pto at 540e but strangely theres no indication on the rev counter as to what the engine rpm should be. Can anyone with a 6800 tell me what it should be? TIA.
I have a 6190 with stiff steering.
tractor has CCLS hydraulics. High pressure filter on right hand cover and oil has been changed.
If I press the brakes the steering immediately releases and turns normally.
The clutch, 4wd, PTO, Dynashift and lift arms all work well, and getting good pressure...
Hi,
I have a 2017 T6.145 AutoCommand.
It is currently stuck in the lower of two gears and won’t drive past about 10m/h
I have a 2019 T7 AC and I know by pressing two buttons I can lock her in low range, this T6 however does not have this option to lock it and is still displaying speed to up to...
Written by Justin Roberts from Agriland
With the latest Toppa series, Grimme believes that it is bringing a new generation of haulm toppers into the market.
Low power consumption, redesigned housing and increased suction power are the main features of the new machines.
A range of different...
Hi All,
I am thinking of making a trailer to make my wood processor mobile, I am looking for horizontal shaft engine so I can fit a spline shaft to it to drive it, any idea's or suggestions gratefully received..
What are peoples opinion/experiences with Pottinger grass kit. I am thinking about buying a Novacat mower and a 6 rotor tedder, a bit out of touch with this type of plant, the last mower we had was a 10ft trailed.
I am confident we will get a good service from the dealer. The mower would just...
What's happening is as the straw is being pulled through by the roller the engine is dying and I'm having to stop the bed quickly and allow the tractor to recover i.e get rid of the straw that's in the fly wheel and go again. The tractor is all but stalling sometimes it seems like it is...
Hi everyone I have a David brown 995 with a low profile cab and when I lift the lift with let’s say transport box on sheel lift and if I put bricks in transport box some time it’ll lift and sometimes it will only lift about an inch is there a dip stick anywhere or sight viewing glass I can check...
I have an intermittent spool fault on my 4220. Sometimes they work fine, other times there is no response from the spool valves, coupled with inactive PTO. Screen recognises the paddle movement so can’t be the switch gear. I have changed both looms in the rear fenders under advice, but it hasn’t...
Hello
I'm about to commence a county court claim against this outfit, who sold me a tractor which was significantly mis-described. Does anyone else have any similar experiences with them?
Long story short, I enquired about a 2013 MF5410 early November 2023. I decided against progressing...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.