• Welcome to The Farming Forum!

    As part of this update, we have made a change to the login and registration process. If you are experiences any problems, please email [email protected] with the details so we can resolve any issues.

pto

  1. D

    Replacement for mf6480

    What would you replace with, Was debating 7s180 or 6s180 But what about other brands? What's fendts equivalents?
  2. Henarar

    Straw chopper with swivel spout

    thinking about getting a round bale straw chopper/spreader with a swivel spout, As compact as possible, linkage mounted I would think, need to throw it 3o to 40 foot, not to much money but not sure how much is to much LOL what would be best ? I have a teagle 4040 for the cubicles which has...
  3. B

    Claas Tractor Specialist

    Hi, Other than a Claas dealer, does anyone know of a company or person knowledgeable on Claas tractors? We have a 2012 Axion 810 hexashift / Dyna6 with the Deere engine that’s started misbehaving. Thanks
  4. H

    NH 8360 wiring loom

    Our 8360 range command had part of the main wiring loom rubbed through and melted some wires together just as it goes to front of the cab under the floor, it needed 15 wires repaired, i thought i had done a good job but now don't seem to be getting any power to the side cab controls, no PTO, pto...
  5. T

    3 Phase PTO Generator

    Have been offered a PTO generator to run our grain dryer. went to have a look at it and it is stamped 380v unsure if this will be any good ?
  6. FarmerMatt04

    John Deere 6420 premium vs 6430 standard

    Been looking at getting a loader tractor and definitely decided on one of these 2. From Ireland so hard to find 6420 with under 7000hrs and can get 6430 with around 5000hrs. Tractor would not be main tractor and used for light loader work and the most power requiring jobs would be towing 14ft...
  7. Farmer mk1

    Soil pan

    Evening folks, We plough all our land normally but about 60% is on real good soil but it is heavy yellow clay and the water can’t get away. There will be about 170 acre ish and wondering what piece of equipment is cost effective and isn’t going to break the bank but will break the clay pan and...
  8. KB6930

    Big square baler hitch

    Random question can a big baler be ran on the pickup hook? Got a claas on demo that was on a ball and spoon but was swapped back to need the drawbar so is there any reason why it couldn't be ran on the hook with the right size eye bolted on . Also looked at an old massey at a mates place and it...
  9. Joe

    Running an Opico grain drier

    In my hatred of fans and turning grain I bought an old grain drier. Never used one and waiting on service engineer, while waiting it’s in good knick and I need to fire it up. Loading have worked out, but anyone have a step by step on how to get it going? Have found the manual online but a...
  10. Persimmnon

    NH 276 PTO clutch retaining bolt torque

    HELP... On a NH 276 I have rebuilt the PTO clutch, including 4 new fiber clutch plates and new ball bearing race on the end of the shaft that supports the clutch plates, and a new universal joint. I have reassembled the clutch but need advice about tightening the 3/8" bolt that secures the...
  11. Agriland RSS

    New Amazone spreader is easier on the pocket

    Written by Justin Roberts from Agriland All machinery manufacturers are feeling the pinch and are looking to offer budget versions of their more sophisticated models, and Amazone is no exception. It has recently launched the ZA-V EcoLine spreader, which retains the basic features of the high...
  12. Boomerang

    The attitudes of the younger generations.

    I keep hearing from many different business owners that the younger generations are almost not worth bothering with. Several times I've heard , they want to do as little as possible ,yet expect footballers wages, no work ethics, no interest in the job .sh!t timekeeping unless it's break...
  13. B

    Krone baler

    I have a krone 12/70 fast bale I have knotter problems works well when straw and hay are nice and fit But when not quite fit all knotters play up randomly any one els have this problem, would like some advice on how to make knotters More reliable or recommended a good person on knotters
  14. D

    What grease

    What grease would be best for swinging hammers in our shredders. Currently using just an exol ep2 because it's cheap, paying £1.79 a cartridge but seem to be getting more wear on the steel bushes than normal. Weather they've made the bushes softer to reduce wear on the shafts, I don't know. We...
  15. A

    Ts 100 sle

    Mate of mine has a ts 100 sle She won't drive at all in high box in forward or reverse Will drive in low box but no power and nearly moves Steering working perfectly and pto Lift isn't working A mate put gauges on her but can't get pressure. This light in picture is also on
  16. Angello

    What make / model of tractor is this?

    I've been offered an option on the old tractor pictured here by a farmer friend of mine.... but embarrassingly I don't even recognise the make, let alone the model :rolleyes: I have been told it was parked many years ago when the PTO finally gave in and I would be looking to try and get it...
  17. 3

    Ford 7840 PTO dropping out

    Hi we a have a customers 7840 and the PTO intermittently drops out and the light goes out.. all seems to be charging ok. Changed the PTO module, worked for 4 hours perfectly this morning and then started to play up ot also drops out when you rev it when it plays up.!! We changed the loom into...
  18. Farm Classifieds

    Igland 65H

    Igland 65H Advert added by: B and B Tractors Machinery Details Category: Other Price: £3750 Condition: Good Description Igland Winch Three point linkage PTO Driven Serial: 65417 How to make contact with the Dealer Click here to read more about this listing and...
  19. E

    Howard 110

    Morning all. Inexperienced hobbiest here, possibility of getting a Howard HR10 110 to go behind my 148. I'm thinking it would be too small. Leave it be or suitable combination?
  20. 76masseyman

    Massey Ferguson ( mainly ) tractor and combine pics from the 70’s and 80’s.

    I often contribute to the Ford & JD 80’s pics, but as my name suggests, I grew up with MF through the 70’s to the 90’s, so I thought a thread had to be started for the red fans. Please feel free to add your MF machinery. Let’s begin.
Back
Top