Case pro 700 isobus problems

[Matt77]

Anyone had problems with these not linking to an implement, got a drill on isobus now, Puma refuses to connect and load on screen but is communicating by the looks as the drill has lights flashing on the units inside drill, the tractor links fine to a Amazon spreader. The drill also connects to our valtra no problem.

 

[SinisaB]

Anyone had problems with these not linking to an implement, got a drill on isobus now, Puma refuses to connect and load on screen but is communicating by the looks as the drill has lights flashing on the units inside drill, the tractor links fine to a Amazon spreader. The drill also connects to our valtra no problem.

You have to upgrade software version on AFS 700.

 

[Matt77]

You have to upgrade software version on AFS 700.

Thanks, I wondered if that might be the case. Odd that the amazon is fine though?

 

[SinisaB]

Thanks, I wondered if that might be the case. Odd that the amazon is fine though?

I have had the problem with Magnum. Just new software. Of course, Case dealer has to be involved.

 

[Daniel]

I have had the problem with Magnum. Just new software. Of course, Case dealer has to be involved.

You'd think software updates could be emailed to the farmer and transferred via usb stick? But no, always needs a dealer visit and call out charges etc!

 

[SinisaB]

You'd think software updates could be emailed to the farmer and transferred via usb stick? But no, always needs a dealer visit and call out charges etc!

That's the way. Only dealer has a software.

 

[Matt77]

That's the way. Only dealer has a software.

I’ll get it done, it hasn’t had an update for a few years, probably due one.

 

[drifter]

What type of drill are you running, the problem with isobus in general is its compatibility or in some cases the lack of it. Whilst most of this may have been resolved there could still be kit out there that doesnt support each other. Ive just been trying to get the AEF database to work with no success at all. It could be just an update on the tractor or the implement.

 

[Matt77]

What type of drill are you running, the problem with isobus in general is its compatibility or in some cases the lack of it. Whilst most of this may have been resolved there could still be kit out there that doesnt support each other. Ive just been trying to get the AEF database to work with no success at all. It could be just an update on the tractor or the implement.

Mzuri, which runs on RDS bits. I’ve taken my Puma GPS kit to be updated, so with any luck I’ll see in a few days if that works. The valtra is nearly new so would have the latest software, so it’s believable it’s the problem.

 

[GPS_Support_2014]

Some ISO implements require a minimum of 10 soft keys (buttons) on the VT screen.
Earlier software versions on the AFS display only supported 6 keys.
With the later software it is possible to switch between 6 soft keys and 12 soft keys.
You can do that in Toolbox > VT

That may be a setting worth trying to adjust for your issue.
The fact that the spreader loads ok confirms it’s not a connector or wiring issue.

 

[Matt77]

Some ISO implements require a minimum of 10 soft keys (buttons) on the VT screen.
Earlier software versions on the AFS display only supported 6 keys.
With the later software it is possible to switch between 6 soft keys and 12 soft keys.
You can do that in Toolbox > VT

That may be a setting worth trying to adjust for your issue.
The fact that the spreader loads ok confirms it’s not a connector or wiring issue.

Thanks , I tried it on 6 and 12, no luck, the Amazon had the coloured loading blocks in the top right boxes, the Mzuri never did, I’m hopeful that having it all updated this weekend will solve it!

 

[GPS_Support_2014]

I have seen RDS based ISO implements loaded to the CNH display correctly in the past so I’d agree that the software update should sort it

 

[Matt77]

Sadly the update doesn’t seem to have solved it, hopefully make some calls tomorrow to get help on it.
I don’t know if this settings page is correct, I’ve tried it on 6 and 12 soft keys, there’s versions 2,3&4 available, I’ve tried all 3. I’ve found an icon that says VT upload, with a (I’m guessing) loading bar under it, that’s not doing anything.

 

[SinisaB]

What about implement software?

 

[Matt77]

What about implement software?

It’s running the latest RDS software apparently, it works on the valtra, which is less than a year old ?‍

 

[SinisaB]

It’s running the latest RDS software apparently, it works on the valtra, which is less than a year old ?‍

Does the sistem see the implement? When you go to choose an implement, do you have your drill?

 

[Matt77]

No not that I’ve seen, it needs to load it on doesn’t it, and that’s what it’s not doing

 

[FrallyWally]

what year is the tractor? older CNH machines dont have the ignition pin in the isobús socket in the back. some implements need the ignition to start the ecu and some dont.

 

[Matt77]

2013 Puma

 

[Matt77]

The Mzuri has its own power supply if that makes any difference, from the tractor