Drilling beans with a weaving topsoiler?

[JCfarmer]

Might sell the Claydon and look to drill beans behind our topsoiler. Row spacing would be 41cm.
Has anyone bought the kit to go behind the legs, twin pipes generally, blockages and depth control?
Spoke with Simon Weaving the other day but hasn't come back to me with a price.

 

[jack6480]

It’s not the time of day or the time of year to be worrying about this. Go back to sitting in a dark room

 

[Will 1594]

Might sell the Claydon and look to drill beans behind our topsoiler. Row spacing would be 41cm.
Has anyone bought the kit to go behind the legs, twin pipes generally, blockages and depth control?
Spoke with Simon Weaving the other day but hasn't come back to me with a price.

Do just that
made our bean drill out ofbold suerflow frame have 11 legs over 3.5 m ,cousins razor ring packer ,
and made some coulters .j ,,or hockey stick shaped ,2 tubes welded together,but where welded together at bottom cut tubes top and bottom out if you follow to make outlet bigger , or they block now again if sticky and wet like last year ,
lost a coulter last year and found it so will go get itnout of sprayer box and take you a pic ,
dead easy to make and i welded a piecebof flat on back of shakerator leg with holes in it so you can alter depth of tubes to leg depth to which said tubes fasten too ,
next project is bourgalt 5 inch twins to put wheat in , be like home made dts or use krm cultidisc

 

[jack6480]

Ouch

 

[JCfarmer]

Ouch

I apologise, had a bad day. Gone now anyway

 

[jack6480]