Folding water filled roller withshatter boards?

[daveydiesel1]

So our land roller has seen better days and iv been studying about making a new frame for it as its the part thats rotten and turning it into a compactor with rings welded to it for behind the buckrake, which means id need a new roller. Id also like a cambridge roller with shatter boards for making ploughed ground ready to reseed after the powerharrow, but seeimg as the bank account is holding me back as usual i was wondering does any1 make a water ballasted folding land roller with shatter boards? Any ideas on pricing? And would it do a good enough job on soil compared to the rings? Woukdnt have to run it full when on the soilif it was gonna be too heavy

 

[RH15LEW]

Dalbo do one

 

[daveydiesel1]

Dalbo do one

Would you have any idea what that would cost

 

[bravheart]

There's leveling boards in the classifieds if you feel the need for welding

 

[RH15LEW]

Would you have any idea what that would cost

I can’t imagine there would be much change from 20k. 630 Greenline just rollers cost me 15k start of the year

 

[Welderloon]

Pretty sure Walter Watson at your side of the water will easily knock up a set for you.

 

[daveydiesel1]

Pretty sure Walter Watson at your side of the water will easily knock up a set for you.

I lokked on his site before asking on here but it didnt say about that option so thought id ask here

 

[davidroberts30]

So our land roller has seen better days and iv been studying about making a new frame for it as its the part thats rotten and turning it into a compactor with rings welded to it for behind the buckrake, which means id need a new roller. Id also like a cambridge roller with shatter boards for making ploughed ground ready to reseed after the powerharrow, but seeimg as the bank account is holding me back as usual i was wondering does any1 make a water ballasted folding land roller with shatter boards? Any ideas on pricing? And would it do a good enough job on soil compared to the rings? Woukdnt have to run it full when on the soilif it was gonna be too heavy

why does it need to be new??
me and 2 neighbours have bought a set of cambridge rollers and shatter boards for a few k

 

[daveydiesel1]

why does it need to be new??
me and 2 neighbours have bought a set of cambridge rollers and shatter boards for a few k

It doesnt have to be new, but i quite like the idea of quick grassland rolling aswel and iv never seen a water ballast with the shatter boards before

 

[RH15LEW]

MAXIROLL GREENLINE 630 and 830 grass rollers are modern and innovative machines.

Our MAXIROLL GREENLINE 630 and 830 are efficient, high-capacity trailed grass rollers.

www.dalboagro.com

 

[daveydiesel1]

MAXIROLL GREENLINE 630 and 830 grass rollers are modern and innovative machines.

Our MAXIROLL GREENLINE 630 and 830 are efficient, high-capacity trailed grass rollers.

www.dalboagro.com

That 1 with the sower on it looks the dab hand

 

[Fergieman]

Heva do a set.
I am sure you could spec it without the tines.

 

[daveydiesel1]

Heva do a set.
I am sure you could spec it without the tines.

The tines n seeder would be good but as the machine could roll grassland,make ready to reseed and tgen sow it before leaving the field, real multipurpose machine

 

[dannewhouse]

There's leveling boards in the classifieds if you feel the need for welding

Can you put a link up I'm struggling to find them.
Ideally wanting a set for our dalbo 630 rolls.

 

[Tim]

We have a set of dalbo greenline 630 with shatter boards . It’s up there with one of the
best things we have bought . Brilliant for leveling off ploughing pre cultivations and then also used in conjunction with a electro broadcaster mounted on the front of the tractor for reseeding and also for scratching over stubbles for cover crops . Also good for spring rolling where we have spread muck on grassland in the winter to break it up and incorporate into the ground . We sold our grass harrows and now just use the boards and rollers . We did spread muck ( well rotten) on silage aftermaths and worked in very well . We bought ours 2nd hand in Jan this year £11500 . May look at trade up at some point and go with the mounted seeder ,

 

[bravheart]

Can you put a link up I'm struggling to find them.
Ideally wanting a set for our dalbo 630 rolls.

Sorry can't find them now either. The post must have spurred a buyer into action. Maybe @daveydiesel1 took them and hasn't let on.
Checked before posting earlier.

 

[daveydiesel1]

Sorry can't find them now either. The post must have spurred a buyer into action. Maybe @daveydiesel1 took them and hasn't let on.
Checked before posting earlier.

No id need a roller to put them on first

 

[daveydiesel1]

We have a set of dalbo greenline 630 with shatter boards . It’s up there with one of the
best things we have bought . Brilliant for leveling off ploughing pre cultivations and then also used in conjunction with a electro broadcaster mounted on the front of the tractor for reseeding and also for scratching over stubbles for cover crops . Also good for spring rolling where we have spread muck on grassland in the winter to break it up and incorporate into the ground . We sold our grass harrows and now just use the boards and rollers . We did spread muck ( well rotten) on silage aftermaths and worked in very well . We bought ours 2nd hand in Jan this year £11500 . May look at trade up at some point and go with the mounted seeder ,

Did u have much bother finding a set as i did a quick search and nothing out there currently

 

[Fendt820]

I have a 6.3 green line with the brackets on already and it was 5/6k to retrofit a set of paddles to them