Help before husband finds out!

Cowslip

Member
Mixed Farmer
Accidently knocked hose off wear hydraulic hose connects to ram to activate pin on headstock, should these be the same height or do i need to screw something out the thread???
 

Attachments

  • 20210731_192646.jpg
    20210731_192646.jpg
    149.9 KB · Views: 0
  • 20210731_192636.jpg
    20210731_192636.jpg
    244.9 KB · Views: 0
It's part of the ram, the threaded bit is welded in to ram,
No quick fix I am afraid, as ram will have to be dismantled, to weld a new one in, and will have to be weldedreall good, so no leaks of oil,
Sorry not the news your wanting to hear, just call and tell him over the phone,
That way he will of cooled off by time he is home,

If he still mad, tell the big girls blouse you will buy him flowers and chocolate 🍫😏
 

Cowslip

Member
Mixed Farmer
Luckily tuckwells are on harvest hours, have phoned and they have a new ram on the shelf, have left it in front of workshop so I can put it back together ASAP in morning. Thank god its rained so won't be needing it to load bales in the morning. Husband not to bad when told as I had already sorted replacement, I only went to repair a fence post the bulls had trashed!!! Had a lecture on not using the headstock to push a post in.
 

Bury the Trash

Member
Mixed Farmer
Luckily tuckwells are on harvest hours, have phoned and they have a new ram on the shelf, have left it in front of workshop so I can put it back together ASAP in morning. Thank god its rained so won't be needing it to load bales in the morning. Husband not to bad when told as I had already sorted replacement, I only went to repair a fence post the bulls had trashed!!! Had a lecture on not using the headstock to push a post in.
a new threaded bit could be welded on that easy enough you know, after a clean up grind, to save on a new ram but iguess do that then keep it a s spare .
Will be fine dont worry.
 

Drillman

Member
Mixed Farmer
Luckily tuckwells are on harvest hours, have phoned and they have a new ram on the shelf, have left it in front of workshop so I can put it back together ASAP in morning. Thank god its rained so won't be needing it to load bales in the morning. Husband not to bad when told as I had already sorted replacement, I only went to repair a fence post the bulls had trashed!!! Had a lecture on not using the headstock to push a post in.
Well if my wife went out and did that I wouldn’t care a jot about a busted locking pin on the loader. I just be grateful I didn’t have to knock off from whatever I was doing to go fix a fence.

And for the record yes she would jump on loader and go do it if the need arose👍
 
I don't get why people get so angry at other people when things break. (Unless your a clumsy f**k who breaks things all the time and isn't getting any better at not breaking stuff in which case don't drive things in the first place!) Yes it's annoying but no one does it on purpose.
EVERYONE breaks something at some point no matter how good they are. If they say they don't they are either lying or don't use their stuff.
No one got hurt and you won't do it again will you! ;)
Getting angry never fixed anything did it. It probably slowed down fixing it if anything.
 

NI agri-food stakeholder groups discuss climate change bill with committee

  • 35
  • 0
Written by Richard Halleron from Agriland

The Livestock and Meat Commission (LMC) recently submitted oral evidence to members of the Stormont Agriculture, Environment and Rural Affairs (AERA) committee on the content and potential impact of the Northern Ireland Climate Change Bill (No.2).

This draft legislation was recently introduced to the Northern Ireland Assembly by the Department of Agriculture, Environment and Rural Affairs (DAERA) in conjunction with agriculture minister, Edwin Poots.

“We were accompanied by representatives from a wide range of food industry bodies, including the Northern Ireland Meat Exporters’ Association,the Ulster Farmers’ Union [UFU], Northern...
Top