Lely mower hex shaft replacement
- Thread starter balerman
- Start date
davidroberts30
Member
- Location
- pembrokeshire
Undo the massive nut on the end
Undo the 4 bolts holding the bed to the frame
On the end of the disc unit then there should be a plug that holds the shaft in tight its probably gone and the bearing is too and the shaft has slipped out
You need to slide the end unit off and refurb it and re assemble
Not a massive job and not too expensive either
Undo the 4 bolts holding the bed to the frame
On the end of the disc unit then there should be a plug that holds the shaft in tight its probably gone and the bearing is too and the shaft has slipped out
You need to slide the end unit off and refurb it and re assemble
Not a massive job and not too expensive either
davidroberts30
Member
- Location
- pembrokeshire
john432
Member
- Location
- Carmarthenshire
As your discussing Lely mowers, are the conditioner gearboxes or gears available for the Splendimo LC classic model? Been told nothing available, and cant find the part numbers for the gears listed, although it's a Commer box.
RmfJ
Member
- Location
- Pembrokeshire
Had mine go last week, bought one from mower breaker Meredith George in Boncath, I think he had another on the shelf!
Nearly
Member
- Location
- North of York
@Bobthebuilder has a thread running somewhere...
Dave W
Member
- Location
- chesterfield
never played with lely
davidroberts30
Member
- Location
- pembrokeshire
That's what I said
- Location
- The North
never played with lely
thats cos there shite (sweeping statement prob not to accurate)!
however when at york machinery sales there are generally alot of very new lely mowers in with suspected faults often makes me think this unconventional design is not great and prone to failing.
I have a lely plain mower that we have stripped the bed and used the gearboxes to rebuild trailed mower so the headstock and bed drive gearbox are available if anyone needs anything,I will post pictures later.
Durry cows
Member
- Location
- Derbyshire
Have you got the black arm that puts it in park? The hooks cracked off on mine...
I will get a couple of photographs so you can see what I have
- Location
- northumberland
@Bobthebuilder has a thread running somewhere...
Thought my ears were burning [emoji848] but just thought it was the sunburn off the quad today [emoji57] what width of mower? Ours was the 320mc and has 2 shafts in it 1 shorter than the other so make sure you know which 1 is broken unless your just gonna do them both at same time, should be able to get them from kramp if you can’t get from lely/fendt dealer, just need to make sure n get the discs timed at 90’ to each other when putting new shafts in, not too bad a job to do, mine was a bit more to it as I was replacing spacer sections,skids,discs and the main round shaft as well Project mower refurb
https://thefarmingforum.co.uk/index.php?threads/Project-mower-refurb.283522/
- Location
- northumberland
Ended up beefing ours up years ago so they are double the thickness, would’ve been a lot easier with a plasma cutter to cut the shape rather than a grinder and a few files [emoji57]
- Location
- northumberland
they can't really part in the middle as they have nowhere to go so more than likely 1 of them is broken
That's what I thought,just going by what @davidroberts30 above said.Its a 240.
The London Palladium event “BPR Seminar”
This is our next step following the London rally 
BPR is not just a farming issue, it affects ALL business, it removes incentive to invest for growth
Join us @LondonPalladium on the 16th for beginning of UK business fight back
lwtheatres.co.uk
BPR is not just a farming issue, it affects ALL business, it removes incentive to invest for growth
Join us @LondonPalladium on the 16th for beginning of UK business fight back
BPR Summit | LW Theatres
lwtheatres.co.uk