Looking for a trailed sprayer

[chester]

As above, 3-4000l, 24-30m VG boom, auto section control, iso bus, steering axle. Needs to be reliable and well maintained. Have looked at a couple Chafer which look to fit the bill but are strong money at £45k for a 2015, which has only done 5000ha and £55k for a 2019 which has done 14,000ha , but is higher spec with vg boom and floatations and rowcrops. And has e controlled valves for washing out etc.
Is the Gm-r pictured any good?

 

[fudge]

Have you priced a horsch ax brand new? I have no idea but there could be an offer on and you will get a proper manufacturer’s warranty.

 

[warksfarmer]

Have you priced a horsch ax brand new? I have no idea but there could be an offer on and you will get a proper manufacturer’s warranty.

Fully loaded 30m was £70k not long ago if ran through isobus. More if you needed a screen.

 

[Barleymow]

Nothing wrong with gmr

 

[fudge]

Fully loaded 30m was £70k not long ago if ran through isobus. More if you needed a screen.

Doesn’t sound too bad against a £55k second hand one.

 

[TomD]

Hamblys have got a horsch leeb 4lt 2017 for sale

 

[Blue.]

Avison's have a fair few in,but minimal with prices.

 

[Alistair Nelson]

Claas eastern have a few quite nice looking Horsch’s s/h

 

[Superted820]

I’d steer well clear of Cleanacres from personal experience

 

[Chae1]

Fully loaded 30m was £70k not long ago if ran through isobus. More if you needed a screen.

Is that all?

I thought would be more

 

[Sprayer 1]

I’d steer well clear of Cleanacres from personal experience

What do I need to be careful of as I was going to give them a call about a chafer next week?

 

[Sprayer 1]

What do I need to be careful of as I was going to give them a call about a chafer next week?

Please pm me if you would rather.

 

[Pluto]

I’d steer well clear of Cleanacres from personal experience

Ditto

 

[mobileweld]

Check boom main steel work and also the rear ladder chassis part of the boom for cracks on the chafer… have welded a couple both same places

 

[Superted820]

What do I need to be careful of as I was going to give them a call about a chafer next week?

Buy as seen. Do not expect any agreed work to be done before the machine is delivered to you, even if it is agreed specifically beforehand. Expect the Nsts test to be completely irrelevant and have the machine retested yourself. Price agreed may be with faults rectified etc, but faults will more than likely not be rectified and when challenged will deny all knowledge. I wouldn’t touch them with a barge pole but each to their own.