NH T6 free flow return location

[Horn&corn]

Need to plumb free flow return for new rake. Where does it go in here? There’s a bolt next to top link bracket but won’t be easy to access

 

[rookswood]

I did a t6.180 last year to fit a mchale. There was a 3/4 bung on the casting on the right hand side above the pto cover. That’s where I was told to put it in by the local New Holland guys.

 

[del_boy]

Need to plumb free flow return for new rake. Where does it go in here? There’s a bolt next to top link bracket but won’t be easy to access

Pretty sure its one of these. Have you a front loader fitted that's already using a return? Have you got the operators book it definitely tells you in there

 

[Horn&corn]

Yep loader plumbed in. I wondered if it might require an adaptation to that swept elbow. Thanks very much

 

[del_boy]

Yep loader plumbed in. I wondered if it might require an adaptation to that swept elbow. Thanks very much

I think you will need a t piece to go in the line

 

[del_boy]

Yep loader plumbed in. I wondered if it might require an adaptation to that swept elbow. Thanks very much

If you have the operators book look in there and you might find a another blanking port that might be usuable maybe underneath. Think the one the opposite side is to do with the ls line