Quality reversing camera screen recommendation?

[Chae1]

I'm going to have to fit a screen to my tractor to view cameras I have in drill hopper and on back of sprayer.

It's going to cost circa £1300 to set it up to connect it to tractor screen, so that's not a option.

Camera's I have used 4 pin round plug, analogue type.

So just wondered what other people have fitted , they range in price from £10 to £250.

 

[devonboy]

several sparex ones fitted on things here, more than adequate

 

[Hampton]

Spared ones are fine. Go for the wired ones. Wireless ones are crap (on our place anyway)

 

[Matt77]

all 4 pin round plug here, all off ebay, ranging from £20-40 depending on the deal, higher price one's might have had some cable chucked in, sold the drill with one in the tank, that was 6 year old, still fine, one on the back of the sprayer was fitted in 2017, still fine, another I had on a trailer lasted about a year so think a little down to luck with the cheap one's

 

[Hampton]

Ones with good amounts of cable are about £70 on Amazon.
Search reversing camera

 

[box]

Brigade brand cameras and screens are excellent for anything remotely agricultural. Worth the extra money.

 

[benny6910]

I got a sparex kit for the back of my forklift it’s a good screen and decent quality camera. Was around £200 a couple of years ago.

 

[fermerboy]

I have one of these in our JCB Loadall, from that website.

https://www.reversingcamerasuk.com/heavy-duty-ccd-reversing-camera-system-with-2-cameras.html

Second Loadall its been in, can't fault it really, have one camera mounted back of the cab facing back and another on the RH headlight facing forward.

He'd sell you just the monitor I expect, I phoned and spoke to the lad and thats what he recommended to me.
I've an Ebay one in the tractor and its shite in comparison.

 

[Blue.]

I’ve a reverse camera screen that’s a rear view mirror,would be good on a Fendt because the rear view mirrors shite.
This type.

7" Car Rear View Mirror Monitor with Clip & Suction 12v 24v For Car Truck Camera | eBay

1 x Windscreen Suction Cup. Easy installation, without damaging any parts of the car, clip on the original mirror. Special optical lens substitute the original rearview mirror. Aspect ratio: 16:9/4:3.

www.ebay.co.uk

 

[Chae1]

I’ve a reverse camera screen that’s a rear view mirror,would be good on a Fendt because the rear view mirrors shite.
This type.

7" Car Rear View Mirror Monitor with Clip & Suction 12v 24v For Car Truck Camera | eBay

1 x Windscreen Suction Cup. Easy installation, without damaging any parts of the car, clip on the original mirror. Special optical lens substitute the original rearview mirror. Aspect ratio: 16:9/4:3.

www.ebay.co.uk

They do look better quality.

Haven't noticed a rear view mirror on it!

 

[Blue.]

They do look better quality.

Haven't noticed a rear view mirror on it!

Probably done away with them now.

 

[BuskhillFarm]

That for the fendt? There’s a fella on eBay does adaptors that’ll should do the screen to the cheap eBay caneras

 

[Chae1]

That for the fendt? There’s a fella on eBay does adaptors that’ll should do the screen to the cheap eBay caneras

Yes. I think I know the chap that sells them. Got one on my new Holland.

There's no plug on the tractor to attach camera too. Without spending lots of ££££

 

[Bobthebuilder]

Yes. I think I know the chap that sells them. Got one on my new Holland.

There's no plug on the tractor to attach camera too. Without spending lots of ££££

Is the plug not on the armrest I’m sure it is on our 724 either that or up on right hand corner panel

 

[jack_c]

Another vote for reversing cameras UK here, can do a suzie type cable too so easily plugged in and out when changing machine

 

[Timbo]

Another vote for reversing cameras UK here, can do a suzie type cable too so easily plugged in and out when changing machine

Same - have had several off them, and they're superb for the money

 

[Chae1]

Is the plug not on the armrest I’m sure it is on our 724 either that or up on right hand corner panel

No.

In there wisdom they changed it on gen 6.

Must be a option now.

 

[Rookie]

FendtOne in cab camera terminals.

Just received our FendtOne 724 and bugger me they have changed the camera socket in the cab from a 5 pin female to a 4 pin female so now none of our cables or adaptors fit. Does anyone know if there is an adapter cable or know what the correct description is of the new socket so we can order...

thefarmingforum.co.uk

Anything of help on this old thread?

 

[Blue.]

No.

In there wisdom they changed it on gen 6.

Must be a option now.

my 1st 6r deere didn't have a camera plug,dealer said it couldn't be fitted,I wired one in.
I'm sure I could do the same with a fendt,having a look at one wired up would be best.

 

[Chae1]

my 1st 6r deere didn't have a camera plug,dealer said it couldn't be fitted,I wired one in.
I'm sure I could do the same with a fendt,having a look at one wired up would be best.

I've asked the question from man I bought it from. If there's a way he'll know!

I'm useless with most things involving wires etc, so I'm not starting. I'll just cause damage and it won't work.

The plugs connect to ECU under seat from roof. So have to route everything under cab.

Do wonder if possible to just put a plug near passenger seat...