Written by Rachel Martin
Sheep farmers have been urged to further cut back on the number of ewes they treat with wormers at lambing in a bid to stop further anthelmintic resistance developing.
SCOPS, which is an acronym for ‘Sustainable Control of Parasites’, says farmers who reduce numbers treated will protect the future of wormers on their farm, while reaping the benefit of saving money and time.
The independent industry-led group warns that left unchecked, anthelmintic resistance is one of the biggest challenges to the future health and profitability of sheep farming.
Why treat ewes?
It may be a surprise to many, but worming ewes around lambing is not normally for the benefit of the ewe.
Fit, mature ewes are able to keep worms under control using their immune system. However, if they are under nutritional strain around lambing, their immune system weakens allowing worms in the ewe’s gut to produce a lot more eggs.
This is known as the peri-parturient rise (PPR) and these eggs, if deposited on pasture, will develop into larvae and add to the challenge to lambs later in the season.
Lesley Stubbings of SCOPS said: “The rationale behind treating a ewe is that it removes the worms in her gut and hence the number of worm eggs contaminating the pasture.
Which ewes should be treated?
Historically, sheep farmers have been told the higher the litter size, the more likely the ewe was to have a high PPR.
However, more recent evidence shows it is body condition (BCS) and degree of nutritional strain the ewe is under that is most likely to determine the PPR.
This means well-fed ewes carrying twins, or even triplets that are holding their condition, do not need to be treated. Lean ewes carrying singles should be.
Ms Stubbings continues: “We can use BCS rather than litter size to determine the need to treat.
“Flocks that have adopted this approach have significantly reduced the number of ewes they treat around lambing.”
What proportion of ewes should I leave untreated?
“To reduce the risk of selecting heavily for resistance it has generally been recommended to leave 10-20% of ewes in each grazing mob untreated.
“However, with mounting evidence that fit, well-fed ewes do not need a treatment, we can now view this figure as a minimum,” Stubbings said.
Independent UK research published in 2018, carried out by APHA and funded by VMD, found there was no advantage in blanket worming ewes at lambing.
There was no difference in faecal egg counts or growth rates of lambs reared on ewes that were wormed compared to those that were not treated at lambing.
Top tips for worming ewes
- Leave at least one in 10 of the fittest ewes in each group untreated;
- Make sure you drench to the heaviest ewes;
- Check and calibrate drench guns before you start;
- Take the plunge on scab control.
- Organophosphate dip must get down to the skin to kill sheep scab mites. This can only be done by plunge dipping for one minute.
- OP is only authorised for use as a plunge dip. It must not be used through showers and jetters.
‘Saving money and time’
Gareth Owen, a producer in Leicestershire who monitors egg counts in his ewes, explained the approach has already had multiple benefits for his flock.
“We have monitored ewe egg output in the run-up to lambing for several years and proved to ourselves that the majority of our ewes do not shed many eggs,” he said.
“We must be able to control worms in the long term and am not prepared to risk accelerating the development of resistance on the farm by administering indiscriminate ewe treatments simply because that’s what we always used to do.
“The fact it also saves us a lot of money and time at such a busy period is an extra bonus.”
SCOPS adds that it is very important that a proportion of ewes is left untreated if a persistent worming product is used.
To minimise the risk of resistance developing, SCOPS and Zoetis have agreed guidelines for the use of moxidectin in ewes around lambing.
The post Sheep farmers urged to reduce number of ewes wormed at lambing appeared first on Agriland.co.uk.
Continue reading on the Agriland Website...
