- Location
- Wales UK
Seem very reasonable these days??
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Just bought a kit from above ,but changed to 500 watt panels ,up and running for 1600 quid ,i do have scaffold ,scissors lift etcSounds reasonable , not sure about Solax inverters, never heard of them. Do not forget you will still need wiring, scaffolding and the services of an electrician. You also need the permission of your DNO but that should not be an issue
up to a max of £100plus 15% off if you use the app
Even if ground mounted and battery storage and tied into existing system without and fits etc etcSounds reasonable , not sure about Solax inverters, never heard of them. Do not forget you will still need wiring, scaffolding and the services of an electrician. You also need the permission of your DNO but that should not be an issue
Seems to good??Just bought a kit from above ,but changed to 500 watt panels ,up and running for 1600 quid ,i do have scaffold ,scissors lift etc
you should still seek permission to install if it is grid tied. the issue being is the loading on a single phase. in any given area. If too many are installed it can overload that phase causing over voltage ( above 253 volts ) which causes all the trips to go.Even if ground mounted and battery storage and tied into existing system without and fits etc etc
nope just sensibly priced ,Seems to good??
Can it be tied into existing house system utilizing battery in package and without fitting the meter in pack also??nope just sensibly priced ,
That is kinda what i thought too...Even if ground mounted and battery storage and tied into existing system without and fits etc etc
Cant be done or has to be all mcs certified does it??That is kinda what i thought too...
I think the DNO would insist it is MCS , but I suspect not too many would be conmcerned. May be an issue for insurance or if you want to sell the house. I do not believe the MCS accreditation means a lot though. I am certain there has been a fair amount of DIY set ups feed back in to the system by a reverse 3 pin plugCant be done or has to be all mcs certified does it??
Need MCS accreditation to get export payments I believe.I think the DNO would insist it is MCS , but I suspect not too many would be conmcerned. May be an issue for insurance or if you want to sell the house. I do not believe the MCS accreditation means a lot though. I am certain there has been a fair amount of DIY set ups feed back in to the system by a reverse 3 pin plug
I don't want to export as total waste of timeNeed MCS accreditation to get export payments I believe.
i pressume so ,just buy panels and connect them in ?Can it be tied into existing house system utilizing battery in package and without fitting the meter in pack also??
its not hard for a quailified electrician to wire it correctly into the fuse board ,a friend told meI think the DNO would insist it is MCS , but I suspect not too many would be conmcerned. May be an issue for insurance or if you want to sell the house. I do not believe the MCS accreditation means a lot though. I am certain there has been a fair amount of DIY set ups feed back in to the system by a reverse 3 pin plug