Trailed mower conditioner

[sakas]

Hi to everyone i am going to buy a new trailed mower and i want your opinion wich one is the best.
Kuhn FC 3161 TLR(33k euro)
CLAAS DISCO 3150 TRC (33k euro)
krone TS320 CR (36K)
KVERNELAND 4332 LR (35 K)
Thank you for your anwsers\
(sorry for my mistakes english is not my mother languge)

 

[Dave W]

You you can ask 20 people and get 50 different answers.
They are all basically the same. Pick the one you like from the dealer you favour

 

[deere 6600]

if JD still make them defo a J D 1365

 

[James]

Hi to everyone i am going to buy a new trailed mower and i want your opinion wich one is the best.
Kuhn FC 3161 TLR(33k euro)
CLAAS DISCO 3150 TRC (33k euro)
krone TS320 CR (36K)
KVERNELAND 4332 LR (35 K)
Thank you for your anwsers\
(sorry for my mistakes english is not my mother languge)

Used to have a kv 4332 before I went front and rear. Great mower nice clean cut and followed the ground very very well but than a jd 1365 will.

 

[George Mitchell]

Cant beat a Kverneland (vicon is the same thing). Have a 4332LT with BX belts. Floats well and leaves nothing behind, very reliable too. But like tractors, you might be better to go with whatever good local dealer you have

 

[Boohoo]

if JD still make them defo a J D 1365

Thankfully they've finally stopped making them

 

[Cmoran]

Check out Malone trailed mowers they are decent bit of kit and trouble free

 

[Timbo]

if JD still make them defo a J D 1365

They don't but afew left

 

[oakleaf]

I’d go for the Claas out of the 4 mentioned

 

[dave6470]

I’d go for the Claas out of the 4 mentioned

Hope they've changed from the one my cousin had it was dangerous on hills wood tip over when turning at ends changed after 1 year for kv

 

[deleted user 837354]

Hope they've changed from the one my cousin had it was dangerous on hills wood tip over when turning at ends changed after 1 year for kv

I've heard of people tipping trailed mowers right over unexpectedly, I presume a bit too much speed and gist was involved.

 

[George Mitchell]

I've heard of people tipping trailed mowers right over unexpectedly, I presume a bit too much speed and gist was involved.

Our old KV 4028 would nose dive the right hand side of the cutterbar into the ground when turning left facing downhill, had to lower it down to sort it out. Youd have to be a right arsehole to chuck one completely over

 

[KB6930]

Hope they've changed from the one my cousin had it was dangerous on hills wood tip over when turning at ends changed after 1 year for kv

They were hellish things for that you had to turn right handed or it just lifted the drive end wheel and dug the far away end of the cutter bar into the ground . There were counter balance weights available. Centre pull claas would be the go to for me .

 

[Boohoo]

Our old KV 4028 would nose dive the right hand side of the cutterbar into the ground when turning left facing downhill, had to lower it down to sort it out. Youd have to be a right arsehole to chuck one completely over

There are plenty of mowers that are less stable than those KV mowers though. The 4032 is the best trailed mower I've used.

 

[George Mitchell]

There are plenty of mowers that are less stable than those KV mowers though. The 4032 is the best trailed mower I've used.

Yeah, great range of mowers, though I think the 42 and 43 series with fixed frame and lifting through the suspension is a huge improvement in stability

 

[Boohoo]

Yeah, great range of mowers, though I think the 42 and 43 series with fixed frame and lifting through the suspension is a huge improvement in stability

I didn't like the 4332. Stability was never an issue and it sat where you wanted it to but it wasn't as reliable as the 4032, unless we just got a bad one.

 

[George Mitchell]

Don't see any difference in reliability between the two, 12 years on our 4332 and everything original apart from oil and blades. Bad ones in every colour I suppose

 

[pail of ale]

What are parts prices for claas like ?