has the lowest price. brand new???
https://www.agripartner.fr/presse-a...lectrique-avec-telecommande-metalfach-p-61805 no price but must be about the cheapest new
Spot on but our ground is too steep to pull one round. If I could flatten out I'd have one tomorrowWhy buy new out of curiosity? Second hand Fusion 3 with 50/60K on it will destroy anything anywhere any time. Don’t care what all these haters say about they are no good in this that or the other. They are the king, (I used to think they were overrated until I had a demo and bought it) best out and out baler there is I think
Unless your sole job is straw I can’t see why anyone would want anything else.
I’m now ready for the abuse, give it me
That is a shame. I bale some reclaimed moorland with mine and if I’m being 100% honest I’ve knocked maybe 2 walls out with it over 5-600 bales I do for the bloke and you don’t get much steeper than his high ground but I’m pulling it with 200 horse on boost and she knows it’s there with two heavy silage bales up them slopes at times. But that’s the worst I have to deal with. I’ve some steepish ground at home but a bit of practice I soon got the hang of it, just can’t see where the bale is going till it’s to late sometimes (I still loose the odd one each year)Spot on but our ground is too steep to pull one round. If I could flatten out I'd have one tomorrow
My cousin has a contractor with two fusions to do his with 200hp+ six cylinder John Deeres and they can't do all of his. Ours would be as steep or worse and only got a n141. Tail wagging the dog springs to mind.That is a shame. I bale some reclaimed moorland with mine and if I’m being 100% honest I’ve knocked maybe 2 walls out with it over 5-600 bales I do for the bloke and you don’t get much steeper than his high ground but I’m pulling it with 200 horse on boost and she knows it’s there with two heavy silage bales up them slopes at times. But that’s the worst I have to deal with. I’ve some steepish ground at home but a bit of practice I soon got the hang of it, just can’t see where the bale is going till it’s to late sometimes (I still loose the odd one each year)
For baling what?has the lowest price. brand new???
Rvw Pugh have a Massey 163f ex display £13500. I'm guessing they were crap in the first place because I have never seen or heard of one beforeFor baling what?
I suspect a good used machine with a decent reputation might be better than buying new but bottom of the line?
Arent those Metal Fach balers copies of an old RP12 ? Much better off spending the same amount on a well known brand from a dealer.Ive just traded in a Welger RP245 that is mint and would do a much more reliable job for the same money.For baling what?
I suspect a good used machine with a decent reputation might be better than buying new but bottom of the line?
Yeah exactly what I was saying in my post, I am not the OP.Arent those Metal Fach balers copies of an old RP12 ? Much better off spending the same amount on a well known brand from a dealer.Ive just traded in a Welger RP245 that is mint and would do a much more reliable job for the same money.
if they are after a cheap baler thats probably a good way to go, at least you should be able to get parts for a massey fairly easyRvw Pugh have a Massey 163f ex display £13500. I'm guessing they were crap in the first place because I have never seen or heard of one before
Just thinking that if they were any use I'd have heard of one. One video on YouTube from 12 years ago and that's itif they are after a cheap baler thats probably a good way to go, at least you should be able to get parts for a massey fairly easy