https://www.ebay.co.uk/itm/ford-d-s...245760?hash=item2a9fc70140:g:jRUAAOSwokJagHxK
Got the upright sump but who knows if it is any good!
Got the upright sump but who knows if it is any good!
fitting 6 cylinder engine into major
- Thread starter startinghandle
- Start date
https://www.ebay.co.uk/itm/Diesel-A...063999?hash=item5b439813ff:g:-KgAAOSwhiZaeb~y
This might not be a bad fit and if OK would have more punch than the original Major engine. I fitted one in and old Major based Weatherill years ago and it transformed it. A few mods to engine mounts and side rail by the filter.
This might not be a bad fit and if OK would have more punch than the original Major engine. I fitted one in and old Major based Weatherill years ago and it transformed it. A few mods to engine mounts and side rail by the filter.
Back in the 60's Percy Hendy at Chandler Ford used to build Ford Industrial Engines.
They had a Car Dept, Truck Dept, Tractor and Industrial engine dept.
The industrial engine dept built all sorts of Ford engines and power packs from humble 105E engines to 6 Cylinder Diesel power packs.
They had a Car Dept, Truck Dept, Tractor and Industrial engine dept.
The industrial engine dept built all sorts of Ford engines and power packs from humble 105E engines to 6 Cylinder Diesel power packs.
I have built a few, with d series and cargo engines in, Both sort of fit round the top of bell houseing and use a standard lorry 13" inch clutch. I also jammed a cummins L10 in one as a puller. less simple to do. 6354 will fit, you need a track marshall back plate and it will bolt straight in. Any questions PM me
- Location
- Snodland kent
After seeing the pics of old Thames Traders, gutted to think that my father cut the cab of ours to turn it into a farm trailer. Still have trailer but rest has long gone.
Mursal
Member
- Location
- Lincolnshire
I think thats a hint of clayson yellow on it.
Netherfield
Member
- Location
- West Yorkshire
And no manifolds, which if you believe the story, I find strange.
Certainly not straight out of a Ford truck.
Yes there might well be some porcines there. Could be useful mif cheap tho'.
startinghandle
Member
thanks for all replies, an engine from a mid 60's claas combine has been found, and I have been asked to help so I will be making the side rails longer and modifying the bonnet but we have a difference of opinion regarding the front axle...my cousin wants to turn the axle around but I think keeping it the same way and modifying the A bar
Nearly
Member
- Location
- North of York
Not easily. Starter is on wrong side.
Guy_Incognito
Member
- Location
- Herefordshire
I know it’s a E27n but this is a beauty
Hi Vizslaman can you help me please? I have an old Percy Hendy 4000 tractor and a mobile crusher that it pulls which also has a Percy Hendy engine in it (it says 2753) I need to find out the brake horse power of the engine in the crusher, any ideas please? Is it likely to be over 50bhp?
That would be great thank you very much
