- Location
- Hertfordshire, UK
Morning all, we have changed our batemand sprayer from a Trimble to John Deere system. So we have a full installation kit which was taken off of it for sale.
It compromises of:
1x CFX-750 TRIMBLE DISPLAY WITH RTK AND HARNESSES
1X TRIMBLE EZ STEER & HARNESSES (SAM 200)
1X 12 SECTION SWITCH PANEL
1X TRIMBLE RATE CONTROL MODULE & SECTION CONTROL MODULE AND HARNESSES (75774-01)
1X ROOF MOUNTED RADIO ANTENNA
1X AUTO STEER SWITCH
1X IMD-600
1x AG25 DOME & HARNESS.
The only part that it doesn't have is the main power harness as we kept this for the new install and the flow meter as this was also kept as part of the new install. If it's going onto a Bateman it really should be quite straightforward plug and play.
It is all in good working order and was only changed as we run JD RTK so when we brought it in April we changed it all over. The ez steers are very repairable and accurate so they hold there value well. A refurb RTK cfx-750 from vantage is over £4k and it's the same story with the SAM-200.
Let me know if your interested, we are looking for around £6,200 ONO for the lot.
It compromises of:
1x CFX-750 TRIMBLE DISPLAY WITH RTK AND HARNESSES
1X TRIMBLE EZ STEER & HARNESSES (SAM 200)
1X 12 SECTION SWITCH PANEL
1X TRIMBLE RATE CONTROL MODULE & SECTION CONTROL MODULE AND HARNESSES (75774-01)
1X ROOF MOUNTED RADIO ANTENNA
1X AUTO STEER SWITCH
1X IMD-600
1x AG25 DOME & HARNESS.
The only part that it doesn't have is the main power harness as we kept this for the new install and the flow meter as this was also kept as part of the new install. If it's going onto a Bateman it really should be quite straightforward plug and play.
It is all in good working order and was only changed as we run JD RTK so when we brought it in April we changed it all over. The ez steers are very repairable and accurate so they hold there value well. A refurb RTK cfx-750 from vantage is over £4k and it's the same story with the SAM-200.
Let me know if your interested, we are looking for around £6,200 ONO for the lot.