Jcb telehandler joystick

[nick...]

I’ve got a 55 reg 531/70 and torque converter cut out button on front end of joystick has fallen apart.ive had correspondence with people who tell me I can buy the button but has anyone taken the joystick apart.i can’t see any screws holding it all together.any help appreciated.pics attached.rubber dissapeared ages ago and small square bit fell,out earlier this week.still works but it’s not right.
nick...

 

[milkloss]

Watching with interest. Our buttons are on the face of the stick and the de clutch button has done the same. Some say the button will lever out I gather.

here's a bump anyway!

 

[ACEngineering]

I’ve got a 55 reg 531/70 and torque converter cut out button on front end of joystick has fallen apart.ive had correspondence with people who tell me I can buy the button but has anyone taken the joystick apart.i can’t see any screws holding it all together.any help appreciated.pics attached.rubber dissapeared ages ago and small square bit fell,out earlier this week.still works but it’s not right.
nick...

If you have found a supply of original button switches please share! I get a call for them nearly once a week! As far as I know there are no user replaceable parts available to buy for that stick.

There is one from RS people have said works but it looks nothing like the originals.

I think they pull out? But there is a PCB board inside there so not sure if there connected to that not.

There easy to open up anyway but I think there some funny headed screws?

 

[nick...]

If you have found a supply of original button switches please share! I get a call for them nearly once a week! As far as I know there are no user replaceable parts available to buy for that stick.

There is one from RS people have said works but it looks nothing like the originals.

I think they pull out? But there is a PCB board inside there so not sure if there connected to that not.

There easy to open up anyway but I think there some funny headed screws?

Someone from Ireland called fc spares.they assure me the part will fit but I’ve spoken to several other companies who assure me it’s new joystick time at £1125.00 and there is no other option.
nick...

 

[ACEngineering]

Someone from Ireland called fc spares.they assure me the part will fit but I’ve spoken to several other companies who assure me it’s new joystick time at £1125.00 and there is no other option.
nick...

Looks close enough to me! Hot glue it in if needed! Dont think they have nuts on inside but could be wrong. Did have a joystick for spares but robbed all buttons out of it and someone wanted the PCB board out of it a couple weeks ago to replace a burnt one in there new Holland so sold it too him. New stick was £900 on that. But I know some jcb ones go up well over 1k!

 

[melted welly]

Someone from Ireland called fc spares.they assure me the part will fit but I’ve spoken to several other companies who assure me it’s new joystick time at £1125.00 and there is no other option.
nick...

it is possible to replace the buttons, our friendly local sparkie has a stock of 2nd hand ones from faulty joysticks that have been changed.

total joke that a part costing pennies can be palmed off as needing a replacement £1100+ unit.

 

[ACEngineering]

Someone from Ireland called fc spares.they assure me the part will fit but I’ve spoken to several other companies who assure me it’s new joystick time at £1125.00 and there is no other option.
nick...

There is a similar red button in the cap catalogue but its alot smaller than the hole in joystick.

 

[OkHumourMe]

Looks close enough to me! Hot glue it in if needed! Dont think they have nuts on inside but could be wrong. Did have a joystick for spares but robbed all buttons out of it and someone wanted the PCB board out of it a couple weeks ago to replace a burnt one in there new Holland so sold it too him. New stick was £900 on that. But I know some jcb ones go up well over 1k!

 

[OkHumourMe]

There is a similar red button in the cap catalogue but its alot smaller than the hole in joystick.

Hello there,
I have a contact in Rexroth who is able to get me these buttons. They are costing close to 50 Euro though. I already replaced the ones in my TM 320s. They are the original part and have the blue leads on them. you can Wire them directly into the plug or just join the wires. 10 minute job. If you guys want these, drop me a line. I'll buy a bunch of them for stock.

 

[sjt01]

If it is the on push button, not a proportional control knob type of stick like yours, we have used these which screw into the hole, and poke out more than the JCB ones. I prefer using them to the rubbery things

JCB joystick​	​	​
Switches​	APEM 10400​	​
​	​	​
Switch​	236-9547​	£13.20​
Cap green​	484-6276​	£1.10​
Cap red​	484-6282​	£1.10​

https://uk.rs-online.com/web/p/push-button-switches/2369547

 

[ACEngineering]

I'm told David king and vicory plant do both types of these buttons now.

 

[br jones]

great exportations tetbury ,used to refurb joysticks and spare bits .dont know if they still do

 

[ACEngineering]

great exportations tetbury ,used to refurb joysticks and spare bits .dont know if they still do

No they dont, they just sent them too or use some one like David king.

 

[deleted user 837354]

I'm told David king and vicory plant do both types of these buttons now.

Was gonna say, you can probably take the stick off and send it away to them and have it back within a few days?

 

[gm69]

Anyone know where to get the forward/reverse switch which is on the back of this joystick

 

[John Ervine]

Hello there,
I have a contact in Rexroth who is able to get me these buttons. They are costing close to 50 Euro though. I already replaced the ones in my TM 320s. They are the original part and have the blue leads on them. you can Wire them directly into the plug or just join the wires. 10 minute job. If you guys want these, drop me a line. I'll buy a bunch of them for stock.

Hi I’m looking for the buttons on top joystick on jcb 536 there the blue rubber type can u help. Thanks. John

 

[John Ervine]

Hi I’m looking for the buttons on top joystick on jcb 536 there the blue rubber type can u help. Thanks. John

 

[nick...]

Do a search on ebay
nick…

 

[quattro]

Soft covers on the buttons had gone on ours and they put a complete new joystick on

 

[melted welly]

Soft covers on the buttons had gone on ours and they put a complete new joystick on

new joysticks are about £1100. For the sake of a couple 20p button covers, seems pretty excessive.

did they leave you the old one?