Jcb telehandler joystick

[ACEngineering]

View attachment 1163265
Thank you @ACEngineering. I received this today so at least some of my problems are fixed

Many thanks.

Not had any cards printed for years and years, they just arrived minutes before courier came to collect so just managed to slip a couple in box and reseal

 

[Tractor Tim]

Many thanks.

Not had any cards printed for years and years, they just arrived minutes before courier came to collect so just managed to slip a couple in box and reseal

Was almost like pass the parcel so well packaged

 

[ACEngineering]

Was almost like pass the parcel so well packaged

I know what these couriers are like! plus i get a bit of an excess of boxes normally

 

[pallypally]

Hi, I found a carrier for a reasonable 600k = approx £20 ... parcel up to 10kg.
How about I send you 4 wire buttons to try or rubber bands for the buttons and a dust cover for the travel switch ...
???

 

[nxy]

We are having problems with our 526-56 today, no boom functions are working at all. It's showing an error code L020 which I think is lower/tilt switch power short to ground. I have tested and bypassed the red stop button but still no joy.

I have now completely unplugged the joystick and its still coming up with the error code, does that mean the short is not in the joystick or am I am being too simplistic about this? Thanks

 

[nxy]

We are having problems with our 526-56 today, no boom functions are working at all. It's showing an error code L020 which I think is lower/tilt switch power short to ground. I have tested and bypassed the red stop button but still no joy.

I have now completely unplugged the joystick and its still coming up with the error code, does that mean the short is not in the joystick or am I am being too simplistic about this? Thanks

Got fed up with trying to fix this having checked out the lever, wiring and solenoids so called in the dealer. The chap they sent out said "lower/tilt switch power short to ground" actually means the Brain/ECU has picked up an unexpectedly low voltage in something its connected to, its probably a sensor. He unplugged everything he could think off on the machine that might talk to the ecu and when he unplugged the boom suspension the fault went away. So its staying unplugged.