Kverneland tellus

[e3120]

Yes, I think you're right. Mine:

Ignore the wire in pin 6 - just for strength.

 

[Will 1594]

K b. , why not run a patch lead from green star for your gps , and iso plug out of tractor

 

[KB6930]

K b. , why not run a patch lead from green star for your gps , and iso plug out of tractor

Me ?

Not all tractors I use it on are green star ready I need to run it on 6930 to do last pass through crops to use row crop wheels and it's not got it on .

 

[Northern farmer]

Also the patchwork will keep signal a lot better than GS around trees

Not really familiar with either device and a bit off-topic but if both the Patchwork and the Kverneland are running on Egnos, I doubt Patchwork is any better (probably not noticeably worse either). Are you sure it has the expected accuracy all the time, not fall-backing to autonomous (GPS + GLONASS) and hiding the loss of accuracy where perhaps the other one is set to quit. Try to compare both perhaps on a road next to trees where signal issues may occur.

 

[Northern farmer]

I'm comparing patchwork with green star not kv

Where green star won't even give you a forward speed the patchwork will still provide it eg under trees

Sorry, indeed you mentioned GS. Not familiar with GS either but for such basic operation it sounds like a broken device. Perhaps Green Star users can comment if this is normal.

 

[Rob Hole]

I'm using my patchwork to feed the tellus so can't see a reason why you couldn't use the JD for GPS

How do, I know it’s an old thread but I’m would like to do the same. I have a patchwork black box and now a tellus screen running a Vicon sprayer, how do I get them to talk to each other. I have got an rs232 cable between them. Thanks Rob.

 

[KB6930]

How do, I know it’s an old thread but I’m would like to do the same. I have a patchwork black box and now a tellus screen running a Vicon sprayer, how do I get them to talk to each other. I have got an rs232 cable between them. Thanks Rob.

Honestly I'm not sure I'll get a picture of the cable tomorrow but I'm now using a kv antenna as the patchwork is used for something else

 

[Rob Hole]

Honestly I'm not sure I'll get a picture of the cable tomorrow but I'm now using a kv antenna as the patchwork is used for something else

Thanks for your fast reply btw, do you use your tellus for auto steer?

 

[Rob Hole]

My patchwork runs is connected to as leader auto steer, wonders if the tellus would do the same job then I could use the patch work for something else. It has the same connection on it.

 

[KB6930]

Thanks for your fast reply btw, do you use your tellus for auto steer?

No we run greenstar on 2 tractors

I know the tellus is supposed to be able to do it tho

 

[KB6930]

I can't find the cable but it ran between serial port 2 on the patchwork tilt box and the one 1 the side of the tellus that's got the plug from the kv antenna in it just now

 

[Will Blackburn]

How do, I know it’s an old thread but I’m would like to do the same. I have a patchwork black box and now a tellus screen running a Vicon sprayer, how do I get them to talk to each other. I have got an rs232 cable between them. Thanks Rob.

We do it from the rs232 cable on a massey, just needs the correct null modem between the plugs so the right pins are connected.

 

[Esteban Mittersteiner]

hello, does anyone know how to connect a nav 500 to the tellus go screen? Or other like GPS Smart AGS-TAR Precision,
Antena GPS Atlas 300 Bravo 400S-Delta-